Repositorio Institucional Universidad EAFIT ::Examinando por Materia "priority journal"

Examinando por Materia "priority journal"

Mostrando 1 - 20 de 26

Architecture and microstructure of cortical bone in reconstructed canine mandibles after bone transport distraction osteogenesis
(SPRINGER, 2011-11-01) Zapata, Uriel; Halvachs, Emily K.; Dechow, Paul C.; Elsalanty, Mohammed E.; Opperman, Lynne A.; Zapata, Uriel; Halvachs, Emily K.; Dechow, Paul C.; Elsalanty, Mohammed E.; Opperman, Lynne A.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
Reconstruction of the canine mandible using bone transport distraction osteogenesis has been shown to be a suitable method for correcting segmental bone defects produced by cancer, gunshots, and trauma. Although the mechanical quality of the new regenerate cortical bone seems to be related to the mineralization process, several questions regarding the microstructural patterns of the new bony tissue remain unanswered. The purpose of this study was to quantify any microstructural differences that may exist between the regenerate and control cortical bone. Five adult American foxhound dogs underwent unilateral bone transport distraction of the mandible to repair bone defects of 30-35 mm. Animals were killed 12 weeks after the beginning of the consolidation period. Fourteen cylindrical cortical samples were extracted from the superior, medial, and inferior aspects of the lingual and buccal plates of the reconstructed aspect of the mandible, and 21 specimens were collected similarly from the contralateral aspect of the mandible. Specimens were evaluated using histomorphometric and micro-computed tomographic techniques to compare their microstructure. Except for differences in haversian canal area, histomorphometric analyses suggested no statistical differences in microstructure between regenerate and control cortical bone. Morphological evaluation suggested a consistent level of anisotropy, possibly related to the distraction vector. After 12 weeks' consolidation, bone created during bone transport distraction osteogenesis was comparable to native bone in microstructure, architecture, and mechanical properties. It is proposed that, after enough time, the properties of the regenerate bone will be identical to that of native bone. © Springer Science+Business Media, LLC 2010.
Architecture and microstructure of cortical bone in reconstructed canine mandibles after bone transport distraction osteogenesis
(SPRINGER, 2011-11-01) Zapata, Uriel; Halvachs, Emily K.; Dechow, Paul C.; Elsalanty, Mohammed E.; Opperman, Lynne A.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)
Reconstruction of the canine mandible using bone transport distraction osteogenesis has been shown to be a suitable method for correcting segmental bone defects produced by cancer, gunshots, and trauma. Although the mechanical quality of the new regenerate cortical bone seems to be related to the mineralization process, several questions regarding the microstructural patterns of the new bony tissue remain unanswered. The purpose of this study was to quantify any microstructural differences that may exist between the regenerate and control cortical bone. Five adult American foxhound dogs underwent unilateral bone transport distraction of the mandible to repair bone defects of 30-35 mm. Animals were killed 12 weeks after the beginning of the consolidation period. Fourteen cylindrical cortical samples were extracted from the superior, medial, and inferior aspects of the lingual and buccal plates of the reconstructed aspect of the mandible, and 21 specimens were collected similarly from the contralateral aspect of the mandible. Specimens were evaluated using histomorphometric and micro-computed tomographic techniques to compare their microstructure. Except for differences in haversian canal area, histomorphometric analyses suggested no statistical differences in microstructure between regenerate and control cortical bone. Morphological evaluation suggested a consistent level of anisotropy, possibly related to the distraction vector. After 12 weeks' consolidation, bone created during bone transport distraction osteogenesis was comparable to native bone in microstructure, architecture, and mechanical properties. It is proposed that, after enough time, the properties of the regenerate bone will be identical to that of native bone. © Springer Science+Business Media, LLC 2010.
Bacillus subtilis EA-CB0575 genome reveals clues for plant growth promotion and potential for sustainable agriculture
(Springer, 2020-01-01) Franco-Sierra, N.D.; Posada, L.F.; Santa-María, G.; Romero-Tabarez, M.; Villegas-Escobar, V.; Álvarez, J.C.; Universidad EAFIT. Departamento de Ciencias; Ciencias Biológicas y Bioprocesos (CIBIOP)
Bacillus subtilis is a remarkably diverse bacterial species that displays many ecological functions. Given its genomic diversity, the strain Bacillus subtilis EA-CB0575, isolated from the rhizosphere of a banana plant, was sequenced and assembled to determine the genomic potential associated with its plant growth promotion potential. The genome was sequenced by Illumina technology and assembled using Velvet 1.2.10, resulting in a whole genome of 4.09 Mb with 4332 genes. Genes involved in the production of indoles, siderophores, lipopeptides, volatile compounds, phytase, bacilibactin, and nitrogenase were predicted by gene annotation or by metabolic pathway prediction by RAST. These potential traits were determined using in vitro biochemical tests, finding that B. subtilis EA-CB0575 produces two families of lipopeptides (surfactin and fengycin), solubilizes phosphate, fixes nitrogen, and produces indole and siderophores compounds. Finally, strain EA-CB0575 increased 34.60% the total dry weight (TDW) of tomato plants with respect to non-inoculated plants at greenhouse level. These results suggest that the identification of strain-specific genes and predicted metabolic pathways might explain the strain potential to promote plant growth by several mechanisms of action, accelerating the development of plant biostimulants for sustainable agricultural. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.
Biomechanical characteristics of regenerated cortical bone in the canine mandible
(WILEY-BLACKWELL, 2011-07-01) Zapata, Uriel; Opperman, Lynne A.; Kontogiorgos, Elias; Elsalanty, Mohammed E.; Dechow, Paul C.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)
To test the mechanical properties of regenerate cortical bone created using mandibular bone transport (MBT) distraction, five adult male American foxhound dogs underwent unilateral distraction of the mandible with a novel MBT device placed to linearly repair a 30-35 mm bone defect. The animals were sacrificed 12 weeks after the beginning of the consolidation period. Fourteen cylindrical specimens were taken from the inner (lingual) and outer (buccal) plates of the reconstructed mandible and 21 control specimens were removed from the contralateral aspect of the mandible. The mechanical properties of the 35 cylindrical cortical bone specimens were assessed by using a non-destructive pulse ultrasound technique. Results showed that all of the cortical mechanical properties exhibit higher numerical values on the control side than the MBT regenerate side. In addition, both densities and the elastic moduli in the direction of maximum stiffness of the regenerate cortical bone specimens are higher on the lingual side than the buccal side. Interestingly, there is no statistical difference between elastic modulus (E1 and E2) in orthogonal directions throughout the 35 cortical specimens. The data suggest that not only is the regenerate canine cortical bone heterogeneous, but the elastic mechanical properties tend to approximate transverse isotropy at a tissue level, as opposed to control cortical bone, which is orthotropic. In addition, the elastic mechanical properties are higher not only on the control side but also in the lingual anatomical position, suggesting a stress shielding effect from the presence of the reconstruction plate. © 2011 John Wiley & Sons, Ltd.
Biomechanical configurations of mandibular transport distraction osteogenesis devices.
(MARY ANN LIEBERT, INC, 2010-06-01) Zapata U; Elsalanty ME; Dechow PC; Opperman LA; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)
Mandibular bone transport (MBT) distraction osteogenesis devices are used for achieving reconstruction of mandibular defects in a predictable way, with few complications, less complexity than other alternative surgical procedures, and minimal tissue morbidity. However, selection of appropriate MBT device characteristics is critical for ensuring both their mechanical soundness and their optimal distraction function for each patient's condition. This article assesses six characteristics of currently available MBT devices to characterize their design and function and to classify them in a way that assists the selection of the best device option for each clinical case. In addition, the present work provides a framework for both the biomechanical conception of new devices and the modification of existing ones.
Cognitive behavioral therapy reduces illness perceptions and anxiety symptoms in patients with unruptured intracranial aneurysm
(Churchill Livingstone, 2020-01-01) Lemos M.; Román-Calderón J.P.; Restrepo J.; Gómez-Hoyos J.F.; Jimenez C.M.
The main purpose of this study was to assess the relation between cognitive behavioral therapy and possible changes in illness perceptions and anxiety in patients diagnosed with unruptured intracranial aneurysm. An observational study of an intervention with 67 patients with an unruptured intracranial aneurysm from two medical centers in a Colombian city (n = 35 on the intervention group) was carried out. To assess changes, measurements were taken at baseline and at one-year follow-up with the Beck Anxiety Inventory and the Illness Perception Questionnaire, brief version, taking into account the importance of perceptions in the process of adjusting to illness and acquiring healthy life habits. Hypotheses were tested by a structural model. The results obtained from this study showed that illness perceptions were related to anxiety levels at both time points; however, the relations were stronger before cognitive behavioral therapy (ßt0 = 0.61, p < 0.01; ßt1 = 0.37, p < 0.01). Cognitive behavioral therapy was found to be a moderator of changes in both illness perceptions and anxiety at the time of follow-up (ß = -0.31, p < 0.01; ß = -0.26, p < 0.01). The structural model suggests that cognitive behavioral therapy is associated with less anxiety (ß = -0.17, p < 0.05) and better illness perceptions (ß = -0.35, p < 0.01) in patients diagnosed with unruptured intracranial aneurysms. © 2020 Elsevier Ltd
Cognitive behavioral therapy reduces illness perceptions and anxiety symptoms in patients with unruptured intracranial aneurysm
(Churchill Livingstone, 2020-01-01) Lemos M.; Román-Calderón J.P.; Restrepo J.; Gómez-Hoyos J.F.; Jimenez C.M.; Lemos M.; Román-Calderón J.P.; Restrepo J.; Gómez-Hoyos J.F.; Jimenez C.M.; Universidad EAFIT. Departamento de Humanidades; Estudios en Psicología
The main purpose of this study was to assess the relation between cognitive behavioral therapy and possible changes in illness perceptions and anxiety in patients diagnosed with unruptured intracranial aneurysm. An observational study of an intervention with 67 patients with an unruptured intracranial aneurysm from two medical centers in a Colombian city (n = 35 on the intervention group) was carried out. To assess changes, measurements were taken at baseline and at one-year follow-up with the Beck Anxiety Inventory and the Illness Perception Questionnaire, brief version, taking into account the importance of perceptions in the process of adjusting to illness and acquiring healthy life habits. Hypotheses were tested by a structural model. The results obtained from this study showed that illness perceptions were related to anxiety levels at both time points; however, the relations were stronger before cognitive behavioral therapy (ßt0 = 0.61, p < 0.01; ßt1 = 0.37, p < 0.01). Cognitive behavioral therapy was found to be a moderator of changes in both illness perceptions and anxiety at the time of follow-up (ß = -0.31, p < 0.01; ß = -0.26, p < 0.01). The structural model suggests that cognitive behavioral therapy is associated with less anxiety (ß = -0.17, p < 0.05) and better illness perceptions (ß = -0.35, p < 0.01) in patients diagnosed with unruptured intracranial aneurysms. © 2020 Elsevier Ltd
Contributions of intermolecular bonding and lubrication to the mechanical behavior of a natural armor
(ELSEVIER SCI LTD, 2020-01-01) Jiang, H.; Ghods, S.; Weller, E.; Waddell, S.; Ossa, E.A.; Yang, F.; Arola, D.; Jiang, H.; Ghods, S.; Weller, E.; Waddell, S.; Ossa, E.A.; Yang, F.; Arola, D.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
Among many dermal armors, fish scales have become a source of inspiration in the pursuit of “next-generation” structural materials. Although fish scales function in a hydrated environment, the role of water and intermolecular hydrogen bonding to their unique structural behavior has not been elucidated. Water molecules reside within and adjacent to the interpeptide locations of the collagen fibrils of the elasmodine and provide lubrication to the protein molecules during deformation. We evaluated the contributions of this lubrication and the intermolecular bonding to the mechanical behavior of elasmodine scales from the Black Carp (Mylopharyngodon piceus). Scales were exposed to polar solvents, followed by axial loading to failure and the deformation mechanisms were characterized via optical mechanics. Displacement of intermolecular water molecules by liquid polar solvents caused significant (p = 0.05) increases in stiffness, strength and toughness of the scales. Removal of this lubrication decreased the capacity for non-linear deformation and toughness, which results from the increased resistance to fibril rotations and sliding caused by molecular friction. The intermolecular lubrication is a key component of the “protecto-flexibility” of scales and these natural armors as a system; it can serve as an important component of biomimetic-driven designs for flexible armor systems. Statement of Significance: The natural armor of fish has become a topic of substantial scientific interest. Hydration is important to these materials as water molecules reside within the interpeptide locations of the collagen fibrils of the elasmodine and provide lubrication to the protein molecules during deformation. We explored the opportunity for tuning the mechanical behavior of scales as a model for next-generation engineering materials by adjusting the extent of hydrogen bonding with polar solvents and the corresponding interpeptide molecular lubrication. Removal of this lubrication decreased the capacity for non-linear deformation and toughness due to an increase in resistance to fibril rotations and sliding as imparted by molecular friction. We show that intermolecular lubrication is a key component of the “protecto-flexibility” of natural armors and it is an essential element of biomimetic approaches to develop flexible armor systems. © 2020 Acta Materialia Inc.
Cost-effectiveness analysis of thermotherapy versus pentavalent antimonials for the treatment of cutaneous leishmaniasis
(Blackwell Publishing, 2017-05-30) Cardona-Arias JA; López-Carvajal L; Tamayo Plata MP; Darío-Vélez I; Departamento de Humanidades; Estudios de Filosofía, Hermenéutica y Narrativas
Objective: The treatment of cutaneous leishmaniasis is toxic, has contraindications, and a high cost. The objective of this study was to estimate the cost-effectiveness of thermotherapy versus pentavalent antimonials for the treatment of cutaneous leishmaniasis. Methods: Effectiveness was the proportion of healing and safety with the adverse effects; these parameters were estimated from a controlled clinical trial and a meta-analysis. A standard costing was conducted. Average and incremental cost-effectiveness ratios were estimated. The uncertainty regarding effectiveness, safety, and costs was determined through sensitivity analyses. Results: The total costs were $66,807 with Glucantime and $14,079 with thermotherapy. The therapeutic effectiveness rates were 64.2% for thermotherapy and 85.1% for Glucantime. The average cost-effectiveness ratios ranged between $721 and $1275 for Glucantime and between $187 and $390 for thermotherapy. Based on the meta-analysis, thermotherapy may be a dominant strategy. Conclusion: The excellent cost-effectiveness ratio of thermotherapy shows the relevance of its inclusion in guidelines for the treatment. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd
Design and construction of a transducer for bite force registration.
(ELSEVIER SCI LTD, 2009-05-29) Isaza JF; Throckmorton GS; Roldán SI; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)
This study describes the development of a system for quantification of human biting forces by (1) determining the mechanical properties of an epoxy resin reinforced with carbon fiber, (2) establishing the transducer's optimal dimensions to accommodate teeth of various widths while minimizing transducer thickness, and (3) determining the optimal location of strain gages using a series of mechanical resistance and finite element (FE) analyses. The optimal strain gage location was defined as the position that produced the least difference in strain pattern when the load was applied by teeth with two different surface areas. The result is a 7.3-mm-thick transducer with a maximum load capacity beyond any expected maximum bite force (1500N). This system includes a graphic interface that easily allows acquisition and registration of bite force by any health-sciences or engineering professional.
Design and construction of a transducer for bite force registration.
(ELSEVIER SCI LTD, 2009-05-29) Isaza JF; Throckmorton GS; Roldán SI; Universidad EAFIT. Departamento de Ingeniería de Diseño; Ingeniería de Diseño (GRID)
This study describes the development of a system for quantification of human biting forces by (1) determining the mechanical properties of an epoxy resin reinforced with carbon fiber, (2) establishing the transducer's optimal dimensions to accommodate teeth of various widths while minimizing transducer thickness, and (3) determining the optimal location of strain gages using a series of mechanical resistance and finite element (FE) analyses. The optimal strain gage location was defined as the position that produced the least difference in strain pattern when the load was applied by teeth with two different surface areas. The result is a 7.3-mm-thick transducer with a maximum load capacity beyond any expected maximum bite force (1500N). This system includes a graphic interface that easily allows acquisition and registration of bite force by any health-sciences or engineering professional.
Drug dosage individualization based on a random-effects linear lodel
(TAYLOR & FRANCIS INC, 2012-01-01) Diaz, Francisco J.; Cogollo, Myladis R.; Spina, Edoardo; Santoro, Vincenza; Rendon, Diego M.; de Leon, Jose; Universidad EAFIT. Escuela de Ciencias; Modelado Matemático
This article investigates drug dosage individualization when the patient population can be described with a random-effects linear model of a continuous pharmacokinetic or pharmacodynamic response. Specifically, we show through both decision-theoretic arguments and simulations that a published clinical algorithm may produce better individualized dosages than some traditional methods of therapeutic drug monitoring. Since empirical evidence suggests that the linear model may adequately describe drugs and patient populations, and linear models are easier to handle than the nonlinear models traditionally used in population pharmacokinetics, our results highlight the potential applicability of linear mixed models to dosage computations and personalized medicine. Copyright © Taylor & Francis Group, LLC.
Effect of chemical composition and microstructure on the mechanical behavior of fish scales from Megalops Atlanticus
(ELSEVIER SCIENCE BV, 2016-03-01) Gil-Duran, S.; Arola, D.; Ossa, E.A.; Gil-Duran, S.; Arola, D.; Ossa, E.A.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
This paper presents an experimental study of the composition, microstructure and mechanical behavior of scales from the Megalops Atlanticus (Atlantic tarpon). The microstructure and composition were evaluated by Scanning Electron Microscopy (SEM) and RAMAN spectroscopy, respectively. The mechanical properties were evaluated in uniaxial tension as a function of position along the length of the fish (head, mid-length and tail). Results showed that the scales are composed of collagen and hydroxyapatite, and these constituents are distributed within three well-defined layers from the bottom to the top of the scale. The proportion of these layers with respect to the total scale thickness varies radially. The collagen fibers are arranged in plies with different orientations and with preferred orientation in the longitudinal direction of the fish. Results from the tensile tests showed that scales from Megalops Atlanticus exhibit variations in the elastic modulus as a function of body position. Additional testing performed with and without the highly mineralized top layers of the scale revealed that the mechanical behavior is anisotropic and that the highest strength was exhibited along the fish length. Furthermore, removing the top mineralized layers resulted in an increase in the tensile strength of the scale. © 2015 Elsevier Ltd.
Efficient use of mobile devices for quantification of pressure injury images
(IOS Press, 2018-01-01) Garcia-Zapirain B; Sierra-Sosa D; Ortiz P D; Isaza-Monsalve M; Elmaghraby A; Garcia-Zapirain B; Sierra-Sosa D; Ortiz P D; Isaza-Monsalve M; Elmaghraby A; Universidad EAFIT. Departamento de Ciencias; Modelado Matemático
Pressure Injuries are chronic wounds that are formed due to the constriction of the soft tissues against bone prominences. In order to assess these injuries, the medical personnel carry out the evaluation and diagnosis using visual methods and manual measurements, which can be inaccurate and may generate discomfort in the patients. By using segmentation techniques, the Pressure Injuries can be extracted from an image and accurately parameterized, leading to a correct diagnosis. In general, these techniques are based on the solution of differential equations and the involved numerical methods are demanding in terms of computational resources. In previous work, we proposed a technique developed using toroidal parametric equations for image decomposition and segmentation without solving differential equations. In this paper, we present the development of a mobile application useful for the non-contact assessment of Pressure Injuries based on the toroidal decomposition from images. The usage of this technique allows us to achieve an accurate segmentation almost 8 times faster than Active Contours without Edges (ACWE) and Dynamic Contours methods.We describe the techniques and the implementation for Android devices using Python and Kivy. This application allows for the segmentation and parameterization of injuries, obtain relevant information for the diagnosis and tracking the evolution of patient's injuries. © 2018 - IOS Press and the authors.
The global impact of sutures assessed in a finite element model of a macaque cranium
(WILEY-LISS, 2010-09-01) Wang, Qian; Smith, Amanda L.; Strait, David S.; Wright, Barth W.; Richmond, Brian G.; Grosse, Ian R.; Byron, Craig D.; Zapata, Uriel; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)
The biomechanical significance of cranial sutures in primates is an open question because their global impact is unclear, and their material properties are difficult to measure. In this study, eight suture-bone functional units representing eight facial sutures were created in a finite element model of a monkey cranium. All the sutures were assumed to have identical isotropic linear elastic material behavior that varied in different modeling experiments, representing either fused or unfused sutures. The values of elastic moduli employed in these trials ranged over several orders of magnitude. Each model was evaluated under incisor, premolar, and molar biting conditions. Results demonstrate that skulls with unfused sutures permitted more deformations and experienced higher total strain energy. However, strain patterns remained relatively unaffected away from the suture sites, and bite reaction force was likewise barely affected. These findings suggest that suture elasticity does not substantially alter load paths through the macaque skull or its underlying rigid body kinematics. An implication is that, for the purposes of finite element analysis, omitting or fusing sutures is a reasonable modeling approximation for skulls with small suture volume fraction if the research objective is to observe general patterns of craniofacial biomechanics under static loading conditions. The manner in which suture morphology and ossification affect the mechanical integrity of skulls and their ontogeny and evolution awaits further investigation, and their viscoelastic properties call for dynamic simulations. © 2010 Wiley-Liss, Inc.
Indentation damage and crack repair in human enamel.
(ELSEVIER SCIENCE BV, 2013-05-01) Rivera C; Arola D; Ossa A; Rivera C; Arola D; Ossa A; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
Tooth enamel is the hardest and most highly mineralized tissue in the human body. While there have been a number of studies aimed at understanding the hardness and crack growth resistance behavior of this tissue, no study has evaluated if cracks in this tissue undergo repair. In this investigation the crack repair characteristics of young human enamel were evaluated as a function of patient gender and as a function of the distance from the Dentin Enamel Junction (DEJ). Cracks were introduced via microindentation along the prism direction and evaluated as a function of time after the indentation. Microscopic observations indicated that the repair of cracks began immediately after crack initiation and reaches saturation after approximately 48 h. During this process he crack length decreased up to 10% of the initial length, and the largest degree of reduction occurred in the deep enamel, nearest the DEJ. In addition, it was found that the degree of repair was significantly greater in the enamel of female patients.
Optimization and toxicity assessment of a combined electrocoagulation, H2O2/Fe2+/UV and activated carbon adsorption for textile wastewater treatment
(Elsevier, 2019-02-15) GilPavas, E; Dobrosz-Gomez, I; Gomez-Garcia, MA; GilPavas, E; Dobrosz-Gomez, I; Gomez-Garcia, MA; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
In this study, the potential application of sequential Electrocoagulation + Fenton (F) or Photo-Fenton (PF) + Active carbon adsorption (EC + F/PF + AC) processes were analyzed as alternatives for the treatment of an industrial textile wastewater resulting from an industrial facility located in Medellín (Colombia). In order to maximize the organic matter degradation, each step of the treatment was optimized using the Response Surface Methodology. At first, the optimal performance of EC was achieved with Fe electrodes operating at pH = 7, jEC = 10 mA/cm2 and 60 rpm, during 10 min of electrolysis. At these conditions, EC let to remove 94% of the dye's color, 56% of the COD and 54% of the TOC. Next, sequentially applied Fenton or photo-Fenton process (i.e., EC + F/PF), operating at the optimized conditions (pH = 4.3, [Fe2+] = 1.1 mM, [H2O2] = 9.7 mM, stirring velocity = 100 rpm and reaction time = 60 min.), improved the quality of the treated effluent. The EC + F let to achieve total color reduction, as well as COD and TOC removals of 72 and 75%, respectively. The EC + PF reached 100% of color, 76% of COD and 78% of TOC reductions. The EC + F/PF processes were more efficient than EC in elimination of low molecular weight (<5 kDa) compounds from wastewater. Moreover, the BOD5/COD ratio increased from 0.21 to 0.42 and from 0.21 to 0.46 using EC + F and EC + PF processes, respectively. However, EC + F/PF were not fully effective for the removal of acute toxicity to Artemia salina: 20% and 60% of reduction in toxicity using EC + F and EC + PF, respectively, comparing to very toxic (100%) raw textile wastewater. Thus, activated carbon adsorption was applied as an additional step to complete the treatment. After AC adsorption, the acute toxicity decreased to 10% and 0% using EC + F and EC + PF, respectively. The total operational costs, including chemical reagents, electrodes, energy consumption and sludge disposal, were of 1.65 USD/m3 and 2.3 USD/m3 for EC + F and EC + PF, respectively. © 2018 Elsevier B.V.
Optimization and toxicity assessment of a combined electrocoagulation, H2O2/Fe2+/UV and activated carbon adsorption for textile wastewater treatment
(Elsevier, 2019-02-15) GilPavas, E; Dobrosz-Gomez, I; Gomez-Garcia, MA; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
In this study, the potential application of sequential Electrocoagulation + Fenton (F) or Photo-Fenton (PF) + Active carbon adsorption (EC + F/PF + AC) processes were analyzed as alternatives for the treatment of an industrial textile wastewater resulting from an industrial facility located in Medellín (Colombia). In order to maximize the organic matter degradation, each step of the treatment was optimized using the Response Surface Methodology. At first, the optimal performance of EC was achieved with Fe electrodes operating at pH = 7, jEC = 10 mA/cm2 and 60 rpm, during 10 min of electrolysis. At these conditions, EC let to remove 94% of the dye's color, 56% of the COD and 54% of the TOC. Next, sequentially applied Fenton or photo-Fenton process (i.e., EC + F/PF), operating at the optimized conditions (pH = 4.3, [Fe2+] = 1.1 mM, [H2O2] = 9.7 mM, stirring velocity = 100 rpm and reaction time = 60 min.), improved the quality of the treated effluent. The EC + F let to achieve total color reduction, as well as COD and TOC removals of 72 and 75%, respectively. The EC + PF reached 100% of color, 76% of COD and 78% of TOC reductions. The EC + F/PF processes were more efficient than EC in elimination of low molecular weight (<5 kDa) compounds from wastewater. Moreover, the BOD5/COD ratio increased from 0.21 to 0.42 and from 0.21 to 0.46 using EC + F and EC + PF processes, respectively. However, EC + F/PF were not fully effective for the removal of acute toxicity to Artemia salina: 20% and 60% of reduction in toxicity using EC + F and EC + PF, respectively, comparing to very toxic (100%) raw textile wastewater. Thus, activated carbon adsorption was applied as an additional step to complete the treatment. After AC adsorption, the acute toxicity decreased to 10% and 0% using EC + F and EC + PF, respectively. The total operational costs, including chemical reagents, electrodes, energy consumption and sludge disposal, were of 1.65 USD/m3 and 2.3 USD/m3 for EC + F and EC + PF, respectively. © 2018 Elsevier B.V.
A possible restriction of ferro- and ferricyanide oxidoreductase activities of rat liver mitochondria by the outer membrane.
(ELSEVIER SCIENCE INC, 2005-11-15) Ramirez, LAG; Lemeshko, VV; Universidad EAFIT. Departamento de Ciencias; Ciencias Biológicas y Bioprocesos (CIBIOP)
In this work, various ferro-ferricyanide oxidoreductase activities of rat liver mitochondria were studied to find conditions under which the outer membrane might restrict the flux of these highly charged non-biological anions. When the isotonic low ionic strength medium was supplemented with 25mM KCl, a several-fold increase in the succinate-ferricyanide reductase activity of mitochondria and in the rate of external NADH oxidation in the presence of ferrocyanide was observed. Mitochondrial respiration with 5mM ferrocyanide was almost completely inhibited after consumption of 3.8-18.5% of the dissolved oxygen, depending on the medium and the presence of 2,4-dinitrophenol. These and other experimental data together with mathematical modeling of the redox-state equilibrium suggest that the measured activities might be restricted by two factors: first, the permeability of the outer mitochondrial membrane and second, a strong influence of the ionic strength of incubation media on the intermembrane space redox reactions.
The role of volumetric power input in the growth, morphology, and production of a recombinant glycoprotein by Streptomyces lividans in shake flasks
(ELSEVIER SCIENCE BV, 2014-09-15) Marin-Palacio, Luz D.; Gamboa-Suasnavart, Ramses A.; Valdez-Cruz, Norma A.; Servin-Gonzalez, Luis; Soledad Cordova-Aguilar, Ma.; Soto, Enrique; Kloeckner, Wolf; Buechs, Jochen; Trujillo-Roldan, Mauricio A.; Marin-Palacio, Luz D.; Gamboa-Suasnavart, Ramses A.; Valdez-Cruz, Norma A.; Servin-Gonzalez, Luis; Soledad Cordova-Aguilar, Ma.; Soto, Enrique; Kloeckner, Wolf; Buechs, Jochen; Trujillo-Roldan, Mauricio A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
The impact of flask geometry on Streptomyces lividans growth and morphology, production and O-mannosylation of a recombinant O-glycoprotein (APA from Mycobacterium tuberculosis) was described and associated to the evolution of the volumetric power input (P/V) in three shake flask geometries. During the exponential growth, the highest P/V was found in baffled flasks (BF) with 0.51kW/m3, followed by coiled flasks (CF) with 0.44kW/m3 and normal Erlenmeyer flasks (NF) with 0.20kW/m3 (flasks volume of 250mL, filling with 50mL and agitated at 150rpm). During the stationary phase, P/V decreased 20% in BF and CF, but increased two times in NF, surely due to changes in mycelial morphology and its effects on rheology. Also, NF cultures were carried out at a filling volume and agitation of 15mL, 150rpm (15mL-NF), and 25mL, 168rpm (25mL-NF), in order to raise P/V closely to the values obtained in CF. However, different growth, morphology and recombinant protein productivity were obtained. These data indicate that P/V is not a definitive parameter that can determine bacteria growth and morphology, not even glycoprotein production. But it can be proposed that the oxygen transfer in the center of the pellets and hydromechanical stress might be the more relevant parameters than P/V. © 2014 Elsevier B.V.

Examinando por Materia "priority journal"

Resultados por página

Opciones de ordenación