Optimization and toxicity assessment of a combined electrocoagulation, H2O2/Fe2+/UV and activated carbon adsorption for textile wastewater treatment
Fecha
2019-02-15
Autores
GilPavas, E
Dobrosz-Gomez, I
Gomez-Garcia, MA
Título de la revista
ISSN de la revista
Título del volumen
Editor
Elsevier
Resumen
In this study, the potential application of sequential Electrocoagulation + Fenton (F) or Photo-Fenton (PF) + Active carbon adsorption (EC + F/PF + AC) processes were analyzed as alternatives for the treatment of an industrial textile wastewater resulting from an industrial facility located in Medellín (Colombia). In order to maximize the organic matter degradation, each step of the treatment was optimized using the Response Surface Methodology. At first, the optimal performance of EC was achieved with Fe electrodes operating at pH = 7, jEC = 10 mA/cm2 and 60 rpm, during 10 min of electrolysis. At these conditions, EC let to remove 94% of the dye's color, 56% of the COD and 54% of the TOC. Next, sequentially applied Fenton or photo-Fenton process (i.e., EC + F/PF), operating at the optimized conditions (pH = 4.3, [Fe2+] = 1.1 mM, [H2O2] = 9.7 mM, stirring velocity = 100 rpm and reaction time = 60 min.), improved the quality of the treated effluent. The EC + F let to achieve total color reduction, as well as COD and TOC removals of 72 and 75%, respectively. The EC + PF reached 100% of color, 76% of COD and 78% of TOC reductions. The EC + F/PF processes were more efficient than EC in elimination of low molecular weight (<5 kDa) compounds from wastewater. Moreover, the BOD5/COD ratio increased from 0.21 to 0.42 and from 0.21 to 0.46 using EC + F and EC + PF processes, respectively. However, EC + F/PF were not fully effective for the removal of acute toxicity to Artemia salina: 20% and 60% of reduction in toxicity using EC + F and EC + PF, respectively, comparing to very toxic (100%) raw textile wastewater. Thus, activated carbon adsorption was applied as an additional step to complete the treatment. After AC adsorption, the acute toxicity decreased to 10% and 0% using EC + F and EC + PF, respectively. The total operational costs, including chemical reagents, electrodes, energy consumption and sludge disposal, were of 1.65 USD/m3 and 2.3 USD/m3 for EC + F and EC + PF, respectively. © 2018 Elsevier B.V.
Descripción
Palabras clave
Activated carbon , Adsorption , Coagulation , Color , Effluents , Electrodes , Energy utilization , Image processing , Industrial water treatment , Optimization , Oxidation , Sludge disposal , Textiles , Toxicity , Wastewater disposal , Wastewater treatment , Electro coagulations , Fenton , Industrial textiles , Photo-Fenton , Toxicity assessment , Activated carbon treatment , activated carbon , ferrous gluconate , hydrogen peroxide , iron , organic matter , charcoal , ferric ion , hydrogen peroxide , activated carbon , adsorption , assessment method , coagulation , optimization , response surface methodology , textile industry , toxicity , wastewater treatment , acute toxicity , adsorption , analytic method , Artemia salina , Article , biochemical oxygen demand , chemical oxygen demand , Colombia , controlled study , degradation , effluent , electrocoagulation , electrolysis , energy consumption , molecular weight , nonhuman , pH , priority journal , reaction time , response surface method , sludge disposal , ultraviolet radiation , waste water