Desarrollo y Diseño de Procesos
URI permanente para esta comunidad
El grupo de desarrollo y diseño de procesos busca desarrollar y mejorar procesos empleando herramientas teóricas y experimentales para satisfacer las necesidades industriales y ambientales del país y la región.
Líneas de investigación: Desarrollo de Procesos y Productos; Simulación y Modelación; Procesos Ambientales.
Código Minciencias: COL0037569.
Categoría 2019: A1.
Escuela: Ingeniería.
Departamento académico: Ingeniería de Procesos.
Coordinadora: Santiago Builes Toro.
Correo electrónico: sbuiles@eafit.edu.co
Líneas de investigación: Desarrollo de Procesos y Productos; Simulación y Modelación; Procesos Ambientales.
Código Minciencias: COL0037569.
Categoría 2019: A1.
Escuela: Ingeniería.
Departamento académico: Ingeniería de Procesos.
Coordinadora: Santiago Builes Toro.
Correo electrónico: sbuiles@eafit.edu.co
Examinar
Examinando Desarrollo y Diseño de Procesos por Tipo de documento "Artículo"
Mostrando 1 - 20 de 53
Resultados por página
Opciones de ordenación
Ítem Adsorption of Cadmium Using Biochars Produced from Agro-Residues(American Chemical Society, 2020-01-01) López J.E.; Builes S.; Heredia Salgado M.A.; Tarelho L.A.C.; Arroyave C.; Aristizábal A.; Chavez E.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosBiochars have been shown as promising materials for cadmium remediation. However, the different precursors and the pyrolysis process operating conditions can yield very different surface functional groups, and as a result, different cadmium sorption mechanisms can be observed in biochars. Herein we present the results of cadmium sorption on biochars produced from the pyrolysis of different agro-residues, namely, coffee husk, quinoa straw, and oil palm kernel shell. The adsorption isotherms were used to determine the influence of the biochar's physicochemical characteristics to their sorption behavior. The biochars prepared from quinoa residues showed much higher cadmium uptakes than the other biochars. The concentration of base cations was found to be a critical factor for cadmium sorption. Although the quinoa biochars presented large uptakes, it was found that base cations were supported on the biochars and could be removed by leaching. Results from this study suggest that concentration of base cations on biochars could be used as predictors of the biochar capabilities for the removal of cadmium in aqueous solution. Copyright © 2020 American Chemical Society.Ítem Analysis of CO2 Adsorption in Amine-Functionalized Porous Silicas by Molecular Simulations(American Chemical Society, 2015-06-01) BUILES, SANTIAGO; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosÍtem Analysis of CO2 adsorption in amine-functionalized porous silicas by molecular simulations(American Chemical Society, 2015-06-01) Builes S.; López-Aranguren, P.; Fraile, J.; Vega, L.F.; Domingo, C.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosWe present the results of a combined experimental-molecular simulations approach concerning the capacity for CO2 adsorption of aminosilica hybrid products synthesized using supercritical fluids. Two porous supports were examined for amine functionalization, an ordered mesoporous silica (MCM-41) and a disordered silica gel (SG40). The textural properties of the studied materials were analyzed by low-temperature N2 adsorption-desorption isotherms and compared to those of molecular simulations using the grand canonical Monte Carlo simulation method. The CO2 adsorption capacity of these materials was evaluated by recording CO2 adsorption isotherms up to 100 kPa. Molecular simulations of the CO2 adsorption behavior of selected samples were performed to gain a fundamental understanding of the effect of functionalization. This study shows that in the functionalized materials, the distance between nitrogen atoms of the grafted amines is a critical factor for the occurrence of CO2 chemisorption, providing some insight into key parameters for designing adsorbent materials for CO2 capture and separation. The relationship between the adsorption results with N2 and CO2 allow us to compare the potential applications of the materials in CO2 adsorption and separation processes. A correlation of the N2 adsorption at a given pressure with the CO2 adsorption at a different pressure allowed the prediction of which materials will perform well for these processes. The hybrid products with high amine density have desirable features required for industrial sorbents, such as an enhanced CO2 adsorption capacity and selectivity. © 2015 American Chemical Society.Ítem Approximation of the mechanical response of large lattice domains using homogenization and design of experiments(Universitatea Politehnica Bucuresti, 2020-01-01) Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosLattice-based workpieces contain patterned repetition of individuals of a basic topology (Schwarz, ortho-walls, gyroid, etc.) with each individual having distinct geometric grading. In the context of the design, analysis and manufacturing of lattice workpieces, the problem of rapidly assessing the mechanical behavior of large domains is relevant for pre-evaluation of designs. In this realm, two approaches can be identified: (1) numerical simulations which usually bring accuracy but limit the size of the domains that can be studied due to intractable data sizes, and (2) material homogenization strategies that sacrifice precision to favor efficiency and allow for simulations of large domains. Material homogenization synthesizes diluted material properties in a lattice, according to the volume occupancy factor of such a lattice. Preliminary publications show that material homogenization is reasonable in predicting displacements, but is not in predicting stresses (highly sensitive to local geometry). As a response to such shortcomings, this paper presents a methodology that systematically uses design of experiments (DOE) to produce simple mathematical expressions (meta-models) that relate the stress-strain behavior of the lattice domain and the displacements of the homogeneous domain. The implementation in this paper estimates the von Mises stress in large Schwarz primitive lattice domains under compressive loads. The results of our experiments show that (1) material homogenization can efficiently and accurately approximate the displacements field, even in complex lattice domains, and (2) material homogenization and DOE can produce rough estimations of the von Mises stress in large domains (more than 100 cells). The errors in the von Mises stress estimations reach 42% for domains of up to 24 cells. This result means that coarse stress-strain estimations may be possible in lattice domains by combining DOE and homogenized material properties. This option is not suitable for precise stress prediction in sensitive contexts wherein high accuracy is needed. Future work is required to refine the meta-models to improve the accuracies of the estimations. © 2020 by the authors.Ítem Approximation of the Mechanical Response of Large Lattice Domains Using Homogenization and Design of Experiments(Universitatea Politehnica Bucuresti, 2020-06-01) Montoya, D.; Acosta, D.; Cortes, C.; Pareja, J.; Moreno, Aitor; Posada, Jorge; Ruiz, O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosÍtem Assessment of the optimized treatment of indigo-polluted industrial textile wastewater by a sequential electrocoagulation-activated carbon adsorption process(Elsevier Ltd, 2020-01-01) GilPavas E.; Correa-Sanchez S.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosWastewater collected from a local jean manufacturing plant was treated using an electrocoagulation process (EC) coupled with activated carbon (AC) adsorption. The process variables were optimized using multivariate regression coupled with nonlinear programming with nonlinear restrictions to achieve the lowest possible cost while keeping a high enough degradation rate for chemical oxygen demand (COD), color, and turbidity to fulfill the Colombian environmental regulation requirements. Under optimal conditions (pH = 5.4, s =2 mS/cm, j =14 mA/cm2, and t = 11 min) color, COD, and TOC removals of 95%, 63%, and 51%, respectively, were achieved. The biodegradability index also increased from 0.13 to 0.29, whereas toxicity tests showed a remaining toxicity of 45%. A kinetic study was conducted for the EC process. The activated carbon (AC) adsorption process was successfully used to completely remove toxicity, while further increasing color, COD, and TOC removals to 96%, 72%, and 61%, respectively. The conditions for the AC adsorption process (20 g/L of AC and 1 h) were determined by experimental adsorption isotherms and kinetic studies. The optimized EC/AC process led to an effluent satisfying the Colombian regulations and seems technologically viable with lower costs than other similar process that were reported in previous works. © 2020 Elsevier LtdÍtem Coagulation-flocculation sequential with Fenton or Photo-Fenton processes as an alternative for the industrial textile wastewater treatment(Editorial Board, 2017-04-15) GilPavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosIn this study, the industrial textile wastewater was treated using a chemical-based technique (coagulation-flocculation, C-F) sequential with an advanced oxidation process (AOP: Fenton or Photo-Fenton). During the C-F, Al2(SO4)3 was used as coagulant and its optimal dose was determined using the jar test. The following operational conditions of C-F, maximizing the organic matter removal, were determined: 700 mg/L of Al2(SO4)3 at pH = 9.96. Thus, the C-F allowed to remove 98% of turbidity, 48% of Chemical Oxygen Demand (COD), and let to increase in the BOD5/COD ratio from 0.137 to 0.212. Subsequently, the C-F effluent was treated using each of AOPs. Their performances were optimized by the Response Surface Methodology (RSM) coupled with a Box-Behnken experimental design (BBD). The following optimal conditions of both Fenton (Fe2+/H2O2) and Photo-Fenton (Fe2+/H2O2/UV) processes were found: Fe2+ concentration = 1 mM, H2O2 dose = 2 mL/L (19.6 mM), and pH = 3. The combination of C-F pre-treatment with the Fenton reagent, at optimized conditions, let to remove 74% of COD during 90 min of the process. The C-F sequential with Photo-Fenton process let to reach 87% of COD removal, in the same time. Moreover, the BOD5/COD ratio increased from 0.212 to 0.68 and from 0.212 to 0.74 using Fenton and Photo-Fenton processes, respectively. Thus, the enhancement of biodegradability with the physico-chemical treatment was proved. The depletion of H2O2 was monitored during kinetic study. Strategies for improving the reaction efficiency, based on the H2O2 evolution, were also tested. © 2017 Elsevier LtdÍtem Collaborative design model review in the AEC industry(Springer-Verlag France, 2016-01-01) Carcamo, Juan Gonzalo; Trefftz Gomez, Helmuth; Acosta Maya, Diego Andres; Botero- B, Luis-F; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThe end result of this research is an application created using freely available tools applied to a case scenarioto perform review meetings by different specialists in real time.Ítem Collaborative Networked Virtual Surgical Simulators (CNVSS) Implementing Hybrid Client-Server Architecture: Factors Affecting Collaborative Performance(MIT PRESS, 2015-01-01) Diaz, Christian; Trefftz, Helmuth; Quintero, Lucia; Acosta, Diego A.; Srivastava, Sakti; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosCurrently, surgical skills teaching in medical schools and hospitals is changing, requiring the development of new tools to focus on (i) the importance of the mentor's role, (ii) teamwork skills training, and (iii) remote training support. Collaborative Networked Virtual Surgical Simulators (CNVSS) allow collaborative training of surgical procedures where remotely located users with different surgical roles can take part in the training session. To provide successful training involving good collaborative performance, CNVSS should guarantee synchronicity in time of the surgical scene viewed by each user and a quick response time which are affected by factors such as users' machine capabilities and network conditions. To the best of our knowledge, the impact of these factors on the performance of CNVSS implementing hybrid client-server architecture has not been evaluated. In this paper the development of a CNVSS implementing a hybrid client-server architecture and two statistical designs of experiments (DOE) is described by using (i) a fractional factorial DOE and (ii) a central composite DOE, to determine the most influential factors and how these factors affect the collaboration in a CNVSS. From the results obtained, it was concluded that packet loss, bandwidth, and delay have a larger effect on the consistency of the shared virtual environment, whereas bandwidth, server machine capabilities, and delay and interaction between factors bandwidth and packet loss have a larger effect on the time difference and number of errors of the collaborative task.Ítem Collaborative Networked Virtual Surgical Simulators (CNVSS): Factors Affecting Collaborative Performance(MIT PRESS, 2013-01-01) Diaz, Christian; Trefftz, Helmuth; Quintero, Lucia; Acosta, Diego A.; Srivastava, Sakti; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosStand-alone and networked surgical simulators based on virtual reality have been proposed as a means to train surgeons in specific surgical skills with or without expert guidance and supervision. However, a surgical operation usually involves a group of medical practitioners who cooperate as team members. To this end, CNVSS have been proposed for the collaborative training of surgical procedures in which users with different surgical roles can take part in the training session. To be successful, these simulators should guarantee synchronicity, which requires (1) consistent viewing of the surgical scene and (2) a quick response time. These two variables are affected by factors such as users' machine capabilities and network conditions. As far as we know, the impact of these factors on the performance of CNVSS has not been evaluated. In this paper, we describe the development of CNVSS and a statistical factorial design of experiments (DOE) to determine the most important factors affecting collaboration in CNVSS. From the results obtained, it was concluded that delay, jitter, packet loss percentage, and processor speed have a major impact on collaboration in CNVSS.Ítem Combined electrocoagulation and electro-oxidation of industrial textile wastewater treatment in a continuous multi-stage reactor(IWA PUBLISHING, 2017-11-01) GilPavas; E.; Arbeláez-Castaño; P.; Medina; J.; Acosta; D.A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosA combined electrocoagulation (EC) and electrochemical oxidation (EO) industrial textile wastewater treatment potential is evaluated in this work. A fractional factorial design of experiment showed that EC current density, followed by pH, were the most significant factors. Conductivity and number of electrooxidation cells did not affect chemical oxygen demand degradation (DCOD). Aluminum and iron anodes performed similarly as sacrificial anodes. Current density, pH and conductivity were chosen for a Box-Behnken design of experiment to determine optimal conditions to achieve a high DCOD minimizing operating cost (OC). The optimum to achieve a 70% DCOD with an OC of USD 1.47/m(3) was: pH of 4, a conductivity of 3.7 mS/cm and a current density of 4.1 mA/cm(2). This study also shows the applicability of a combined EC/EO treatment process of a real complex industrial wastewater.Ítem A Comparative Assessment of Emerging Solvents and Adsorbents for Mitigating CO2 Emissions From the Industrial Sector by Using Molecular Modeling Tools(Frontiers Media S.A., 2020-01-01) Bahamon D.; Alkhatib I.I.I.; Alkhatib N.; Builes S.; Sinnokrot M.; Vega L.F.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThe possibilities offered by molecular modeling tools to obtain relevant data at process conditions, while also gaining molecular insights on the techniques used for CO2 capture and separation, are presented here using selected case studies. Two different technologies, absorption with amine-based systems and adsorption on porous materials, were explored, using the molecular-based equation of state, soft-Statistical Associating Fluid Theory (SAFT), and Grand Canonical Monte Carlo simulations, respectively. The aqueous monoethanolamine (MEA) system was set as the benchmark for absorption and compared to the performance of 8 alternative amine-based systems, while 16 adsorbents belonging to different families (zeolites, metal–organic frameworks, amorphous silicas, and activated carbons), bare or functionalized with alkylamines, were investigated for the separation of CO2 by adsorption. In addition to obtaining molecular information on the CO2 capture process, the models were further used to examine the CO2 capture performance in terms of cyclic working capacity and energy index as key performance indicators, allowing the identification of promising systems that can improve the current ones to be further evaluated for separation in non-power industries. Results show that for the same total amine mass concentration, non-aqueous amine solvents have a 5–10% reduction in cyclic working capacity, and a 10–30% decrease in the energy index compared to their aqueous counterparts due to their lower heat of vaporization and specific heat capacity. In addition, M-MOF-74, NaX, and NaY structures present the best results for adsorption in temperature swing adsorption (TSA) processes. Similar values of energy requirements to those of amine-based systems (2–2.5 MJ kg CO2–1) were obtained for some of the adsorbent; however, the disadvantage of the TSA process versus absorption should be considered. These results confirm the reliability of molecular modeling as an attractive and valuable screening tool for CO2 capture and separation processes. © Copyright © 2020 Bahamon, Alkhatib, Alkhatib, Builes, Sinnokrot and Vega.Ítem Conceptual design of a Langmuir probe for cold plasma characterization employing statistical design of experiments(IMPRENTA UNIV ANTIOQUIA, 2013-06-01) Camargo Suarez, Victor Hugo; Acosta Maya, Diego Andres; Jaramillo O, Juan Manuel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThe characterization and control of plasma-assisted processes, has become increasingly urgent to adapt this kind technology to industrial contexts. This work presents the design and construction of a cold plasma characterization system by electrostatic means (Langmuir probe), based on concepts of plasma physics and tools of engineering, design of experiments and conceptual design. The result of this work is a functional prototype probe and some measurements on the reactor.Ítem Control of emissions in an internal combustion engine: first approach for sustainable design(Springer-Verlag France, 2016-08-01) Amaya, A.F.D.; Torres, A.G.D.; Acosta, D.A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosA mathematical model of emissions was developed in a Twingo D7F engine. The effects of variations in compression ratio, fuel/air equivalence ratio, spark advanced and combustion duration under pollutant emissions were studied. Analysis and data collection were performed in an engine bank using a data acquisition system integrated to an Interactive Engineering Environment. A control strategy was implemented to guarantee emissions reduction.Ítem Degradation of Yellow 12 Dye in Industrial Wastewater using Zero-Valent Iron, Hydrogen Peroxide and Ultraviolet Radiation(Centro de Informacion Tecnologica, 2016-09-17) GIL PAVAS EDISON; Medina, J.; Dobrosz-Gómez, I.; Gómez, Miguel Angel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThe Fenton heterogeneous process in a fluidized bed reactor using Zero Valent Iron (ZVI), in the metallic state, for the treatment of textile wastewater has been used an analyzed. The aim of this work was to optimize the following...Ítem Design of computer experiments applied to modeling of compliant mechanisms for real-time control(SPRINGER, 2013-07-01) Acosta, Diego A.; Restrepo, David; Durango, Sebastian; Ruiz, Oscar E.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThis article discusses the use of design of computer experiments (DOCE) (i.e., experiments run with a computer model to find how a set of inputs affects a set of outputs) to obtain a force-displacement meta-model (i.e., a mathematical equation that summarizes and aids in analyzing the input-output data of a DOCE) of compliant mechanisms (CMs). The procedure discussed produces a force-displacement meta-model, or closed analytic vector function, that aims to control CMs in real-time. In our work, the factorial and space-filling DOCE meta-model of CMs is supported by finite element analysis (FEA). The protocol discussed is used to model the HexFlex mechanism functioning under quasi-static conditions. The HexFlex is a parallel CM for nano-manipulation that allows six degrees of freedom (x, y, z, ? x, ? y, ? z ) of its moving platform. In the multi-linear model fit of the HexFlex, the products or interactions proved to be negligible, yielding a linear model (i.e., linear in the inputs) for the operating range. The accuracy of the meta-model was calculated by conducting a set of computer experiments with random uniform distribution of the input forces. Three error criteria were recorded comparing the meta-model prediction with respect to the results of the FEA experiments by determining: (1) maximum of the absolute value of the error, (2) relative error, and (3) root mean square error. The maximum errors of our model are lower than high-precision manufacturing tolerances and are also lower than those reported by other researchers who have tried to fit meta-models to the HexFlex mechanism. © 2012 Springer-Verlag London Limited.Ítem Development of simulation metamodels to predict the performance and exhaust emission parameters of a spark ignition engine(Springer-Verlag France, 2019-01-01) Zutta E.; Acosta D.; Duque A.; Diaz A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosDeveloping more energy-efficient and environmentally friendly transportation technologies, that can enable to use significantly less petroleum and to reduce regulated emissions while meeting or exceeding drivers’ performance expectations, has always been one of the main challenges in automotive technology. Therefore, based on an experimental dataset, metamodels were generated using design of computer experiments and central composite design technique in order to accurately predict carbon monoxide (CO), oxides of nitrogen (NO x), hydrocarbon (HC) and carbon dioxide (CO 2) emissions, mean effective pressure and exergy destruction due to heat transfer and combustion process. Combustion metamodels was evaluated varying air–fuel ratio, ignition timing [(°CAD) Crank Angle Degrees], compression ratio, and combustion duration (°) on the performance of a Spark Ignition (SI) engine at constant speed of 750 rpm. Because SI gasoline engines always encounter the decreased thermal efficiency and increased toxic emissions at idle (Jurgen in Automotive electronics handbook, McGraw-Hill, New York, 1995). The Akaike information criterion was applied to automatically select the best metamodel for each case. © 2019, Springer-Verlag France SAS, part of Springer Nature.Ítem Diseño conceptual de una sonda langmüir para caracterización de plasmas fríos mediante diseño estadístico de experimentos.(IMPRENTA UNIV ANTIOQUIA, 2013-01-01) Camargo, V.; Acosta, Diego A.; JARAMILLO, JUAN MANUEL; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosThe characterization and control of plasma-assisted processes, has become increasingly urgent to adapt this kind technology to industrial contexts. This work presents the design and construction of a cold plasma characterization system by electrostatic means (Langmuir probe), based on concepts of plasma physics and tools of engineering, design of experiments and conceptual design. The result of this work is a functional prototype probe and some measurements on the reactor.Ítem Efficient treatment for textile wastewater through sequential electrocoagulation, electrochemical oxidation and adsorption processes: Optimization and toxicity assessment(Elsevier BV, 2020-01-01) GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosIn this work, the sequential Electrocoagulation + Electro-oxidation + Activated carbon adsorption (EC + EO + AC) process was studied as an alternative for the treatment of an industrial textile wastewater (TWW) issuing from a manufacturing company located in Medellín (Colombia). The EC's and EO's operational conditions were optimized using a Box-Behnken experimental design, the Response Surface Methodology and a constrained nonlinear optimization algorithm in terms of organic matter degradation efficiency. The best performance for EC (i. e., dye removal = 94%, COD and TOC degradation of 45 and 40%, respectively) was obtained using Fe anode and Boron Doped Diamond (BDD) cathode, with current density, jEC, equals to 5 mA/cm2, pH = 9.3, 60 RPM and 10 min of electrolysis. After EC treatment, the effluent biodegradability (evaluated as the BOD5/COD ratio) increases from 0.14 to 0.23. Regrettably, EC was not effective for the removal of acute toxicity to Artemia salina since the treated effluent remained very toxic (100%). The treatment of EC's effluent by EO enhanced organic pollutant removal. For EC + EO sequential process, EO optimal operational conditions (jEO = 10 mA/cm2, pH = 3, 240 RPM, BDD as anode and Fe as cathode) allowed reduction of 100% of color, 88% of COD and 79% of TOC after 30 min of electrolysis. Moreover, the BOD5/COD ratio increased from 0.23 to 0.58; however, the treated effluent remained very toxic to the Artemia salina. Consequently, an activated carbon adsorption step was included to complete the treatment process. Thus, by coupling the EC + EO + AC process, effluent's acute toxicity decreased completely. From molecular weight distribution analysis, it was concluded that EC + EO was efficient in eliminating low molecular weight (< 5 kDa) compounds. Finally, the operation cost, which includes chemical reagents, electrodes, energy consumption, and sludge disposal, for the EC + EO + AC sequential process was estimated in 3.83 USD /m3. © 2020 Elsevier B.V.Ítem Electrochemical degradation of acid yellow 23 by anodic oxidation: optimization of operating parameters(American Society of Civil Engineers (ASCE), 2016-11-01) Gil, Edison Hernán; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
- «
- 1 (current)
- 2
- 3
- »