Artículos
URI permanente para esta colección
Examinar
Examinando Artículos por Tipo de documento "Artículo"
Mostrando 1 - 20 de 72
Resultados por página
Opciones de ordenación
Ítem Análisis de la sensibilidad paramétrica del proceso de producción de ciclo-trimetileno-triamina(Centro de Informacion Tecnologica, 2014-01-01) Ojeda, J.C.; Gilpavas, E.; Dobrosz-Gómez, I.; Gómez, M.Á.; Ojeda, J.C.; Gilpavas, E.; Dobrosz-Gómez, I.; Gómez, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Analyses of temperature, conversion, and their sensitivity with respect to the initial temperature were investigated by parametric sensitivity analysis using a dimensionless batch reactor model for the cyclotrimethylene- triamine synthesis. At first, an expression for its reaction rate was fitted from experimental data available in the literature. Then, a new simple sensitivity-based criterion was used to determine critical operating conditions analyzing temperature sensitivity trajectories. The critical condition of runaway reaction corresponds to a Semenov number (F) equals to 0.684, a heat of reaction parameter (B) equals to 15 and an Arrhenius-type number (?) of 20.Ítem Analytical orientation human management: A path to responsibilization(FUNDACAO GETULIO VARGAS, 2016-01-01) Perez Patino, Juan David; Lopera Arbelaz, Isabel Cristina; Perez Patino, Juan David; Lopera Arbelaz, Isabel Cristina; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)The present paper proposes an approach to human management that privileges conversational spaces in the organization through verbalization, which results in symbolization, socialization and responsibilization of individuals in the organization groups. Our special concern is responsibilization, emphasizing that participation through conversation generates commitment, inclusion and a sense of belonging in individuals. In the cases studied, we have privileged the analytical method, understood as the method of discourse analysis, which underlies the attitude of the professional who grounds his work on listening, analyzing and intervening. The research findings allow the set out of a path to corporate responsibility.Ítem Approximation of the mechanical response of large lattice domains using homogenization and design of experiments(Universitatea Politehnica Bucuresti, 2020-01-01) Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Lattice-based workpieces contain patterned repetition of individuals of a basic topology (Schwarz, ortho-walls, gyroid, etc.) with each individual having distinct geometric grading. In the context of the design, analysis and manufacturing of lattice workpieces, the problem of rapidly assessing the mechanical behavior of large domains is relevant for pre-evaluation of designs. In this realm, two approaches can be identified: (1) numerical simulations which usually bring accuracy but limit the size of the domains that can be studied due to intractable data sizes, and (2) material homogenization strategies that sacrifice precision to favor efficiency and allow for simulations of large domains. Material homogenization synthesizes diluted material properties in a lattice, according to the volume occupancy factor of such a lattice. Preliminary publications show that material homogenization is reasonable in predicting displacements, but is not in predicting stresses (highly sensitive to local geometry). As a response to such shortcomings, this paper presents a methodology that systematically uses design of experiments (DOE) to produce simple mathematical expressions (meta-models) that relate the stress-strain behavior of the lattice domain and the displacements of the homogeneous domain. The implementation in this paper estimates the von Mises stress in large Schwarz primitive lattice domains under compressive loads. The results of our experiments show that (1) material homogenization can efficiently and accurately approximate the displacements field, even in complex lattice domains, and (2) material homogenization and DOE can produce rough estimations of the von Mises stress in large domains (more than 100 cells). The errors in the von Mises stress estimations reach 42% for domains of up to 24 cells. This result means that coarse stress-strain estimations may be possible in lattice domains by combining DOE and homogenized material properties. This option is not suitable for precise stress prediction in sensitive contexts wherein high accuracy is needed. Future work is required to refine the meta-models to improve the accuracies of the estimations. © 2020 by the authors.Ítem Approximation of the Mechanical Response of Large Lattice Domains Using Homogenization and Design of Experiments(Universitatea Politehnica Bucuresti, 2020-06-01) Montoya, D.; Acosta, D.; Cortes, C.; Pareja, J.; Moreno, Aitor; Posada, Jorge; Ruiz, O.; Montoya, D.; Acosta, D.; Cortes, C.; Pareja, J.; Moreno, Aitor; Posada, Jorge; Ruiz, O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Ítem Assessment of the optimized treatment of indigo-polluted industrial textile wastewater by a sequential electrocoagulation-activated carbon adsorption process(Elsevier Ltd, 2020-01-01) GilPavas E.; Correa-Sanchez S.; GilPavas E.; Correa-Sanchez S.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Wastewater collected from a local jean manufacturing plant was treated using an electrocoagulation process (EC) coupled with activated carbon (AC) adsorption. The process variables were optimized using multivariate regression coupled with nonlinear programming with nonlinear restrictions to achieve the lowest possible cost while keeping a high enough degradation rate for chemical oxygen demand (COD), color, and turbidity to fulfill the Colombian environmental regulation requirements. Under optimal conditions (pH = 5.4, s =2 mS/cm, j =14 mA/cm2, and t = 11 min) color, COD, and TOC removals of 95%, 63%, and 51%, respectively, were achieved. The biodegradability index also increased from 0.13 to 0.29, whereas toxicity tests showed a remaining toxicity of 45%. A kinetic study was conducted for the EC process. The activated carbon (AC) adsorption process was successfully used to completely remove toxicity, while further increasing color, COD, and TOC removals to 96%, 72%, and 61%, respectively. The conditions for the AC adsorption process (20 g/L of AC and 1 h) were determined by experimental adsorption isotherms and kinetic studies. The optimized EC/AC process led to an effluent satisfying the Colombian regulations and seems technologically viable with lower costs than other similar process that were reported in previous works. © 2020 Elsevier LtdÍtem The Box-Benkhen experimental design for the optimization of the electrocatalytic treatment of wastewaters with high concentrations of phenol and organic matter.(IWA PUBLISHING, 2009-01-01) GilPavas, Edison; Betancourt, Alejandra; Angulo, Monica; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Betancourt, Alejandra; Angulo, Monica; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)In this work, the Box-Benkhen experimental Design (BBD) was applied for the optimization of the parameters of the electrocatalytic degradation of wastewaters resulting from a phenolic resins industry placed in the suburbs of Medellin (Colombia). The direct and the oxidant assisted electro-oxidation experiments were carried out in a laboratory scale batch cell reactor, with monopolar configuration, and electrodes made of graphite (anode) and titanium (cathode). A multifactorial experimental design was proposed, including the following experimental variables: initial phenol concentration, conductivity, and pH. The direct electro-oxidation process allowed to reach ca. 88% of phenol degradation, 38% of mineralization (TOC), 52% of Chemical Oxygen Demand (COD) degradation, and an increase in water biodegradability of 13%. The synergetic effect of the electro-oxidation process and the respective oxidant agent (Fenton reactant, potassium permanganate, or sodium persulfate) let to a significant increase in the rate of the degradation process. At the optimized variables values, it was possible to reach ca. 99% of phenol degradation, 80% of TOC and 88% of COD degradation. A kinetic study was accomplished, which included the identification of the intermediate compounds generated during the oxidation process.Ítem Coagulation-flocculation sequential with Fenton or Photo-Fenton processes as an alternative for the industrial textile wastewater treatment(Editorial Board, 2017-04-15) GilPavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; GilPavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)In this study, the industrial textile wastewater was treated using a chemical-based technique (coagulation-flocculation, C-F) sequential with an advanced oxidation process (AOP: Fenton or Photo-Fenton). During the C-F, Al2(SO4)3 was used as coagulant and its optimal dose was determined using the jar test. The following operational conditions of C-F, maximizing the organic matter removal, were determined: 700 mg/L of Al2(SO4)3 at pH = 9.96. Thus, the C-F allowed to remove 98% of turbidity, 48% of Chemical Oxygen Demand (COD), and let to increase in the BOD5/COD ratio from 0.137 to 0.212. Subsequently, the C-F effluent was treated using each of AOPs. Their performances were optimized by the Response Surface Methodology (RSM) coupled with a Box-Behnken experimental design (BBD). The following optimal conditions of both Fenton (Fe2+/H2O2) and Photo-Fenton (Fe2+/H2O2/UV) processes were found: Fe2+ concentration = 1 mM, H2O2 dose = 2 mL/L (19.6 mM), and pH = 3. The combination of C-F pre-treatment with the Fenton reagent, at optimized conditions, let to remove 74% of COD during 90 min of the process. The C-F sequential with Photo-Fenton process let to reach 87% of COD removal, in the same time. Moreover, the BOD5/COD ratio increased from 0.212 to 0.68 and from 0.212 to 0.74 using Fenton and Photo-Fenton processes, respectively. Thus, the enhancement of biodegradability with the physico-chemical treatment was proved. The depletion of H2O2 was monitored during kinetic study. Strategies for improving the reaction efficiency, based on the H2O2 evolution, were also tested. © 2017 Elsevier LtdÍtem Combined electrocoagulation and electro-oxidation of industrial textile wastewater treatment in a continuous multi-stage reactor(IWA PUBLISHING, 2017-11-01) GilPavas; E.; Arbeláez-Castaño; P.; Medina; J.; Acosta; D.A.; GilPavas; E.; Arbeláez-Castaño; P.; Medina; J.; Acosta; D.A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)A combined electrocoagulation (EC) and electrochemical oxidation (EO) industrial textile wastewater treatment potential is evaluated in this work. A fractional factorial design of experiment showed that EC current density, followed by pH, were the most significant factors. Conductivity and number of electrooxidation cells did not affect chemical oxygen demand degradation (DCOD). Aluminum and iron anodes performed similarly as sacrificial anodes. Current density, pH and conductivity were chosen for a Box-Behnken design of experiment to determine optimal conditions to achieve a high DCOD minimizing operating cost (OC). The optimum to achieve a 70% DCOD with an OC of USD 1.47/m(3) was: pH of 4, a conductivity of 3.7 mS/cm and a current density of 4.1 mA/cm(2). This study also shows the applicability of a combined EC/EO treatment process of a real complex industrial wastewater.Ítem Control of emissions in an internal combustion engine: first approach for sustainable design(Springer-Verlag France, 2016-08-01) Amaya, A.F.D.; Torres, A.G.D.; Acosta, D.A.; Amaya, A.F.D.; Torres, A.G.D.; Acosta, D.A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)A mathematical model of emissions was developed in a Twingo D7F engine. The effects of variations in compression ratio, fuel/air equivalence ratio, spark advanced and combustion duration under pollutant emissions were studied. Analysis and data collection were performed in an engine bank using a data acquisition system integrated to an Interactive Engineering Environment. A control strategy was implemented to guarantee emissions reduction.Ítem Decolorization and mineralization of Diarylide Yellow 12 (PY12) by photo-Fenton process: the Response Surface Methodology as the optimization tool.(IWA PUBLISHING, 2012-01-01) GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)The Response Surface Methodology (RSM) was applied as a tool for the optimization of the operational conditions of the photo-degradation of highly concentrated PY12 wastewater, resulting from a textile industry located in the suburbs of Medellin (Colombia). The Box-Behnken experimental Design (BBD) was chosen for the purpose of response optimization. The photo-Fenton process was carried out in a laboratory-scale batch photo-reactor. A multifactorial experimental design was proposed, including the following variables: the initial dyestuff concentration, the H(2)O(2) and the Fe(+2) concentrations, as well as the UV wavelength radiation. The photo-Fenton process performed at the optimized conditions resulted in ca. 100% of dyestuff decolorization, 92% of COD and 82% of TOC degradation. A kinetic study was accomplished, including the identification of some intermediate compounds generated during the oxidation process. The water biodegradability reached a final DBO(5)/DQO = 0.86 value.Ítem Decolorization and mineralization of yellow 5 (E102) by UV/Fe2+/H2O2 process. Optimization of the operational conditions by response surface methodology(Elsevier Masson SAS, 2015-10-01) GilPalvas, E.; Gómez, C.M.; Rynkowski, J.M.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; GilPalvas, E.; Gómez, C.M.; Rynkowski, J.M.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)In this study, the optimization and implementation of a homogeneous photo-Fenton process for the decolorization and mineralization of a wastewater containing highly concentrated yellow 5 (E102) dye, resulting from an industry placed in the suburbs of Medellin (Colombia), is presented. Response surface methodology was applied as a tool for the optimization of operational conditions such as initial dyestuff concentration. H2O2 concentration, and UV-radiation power (number of lamps). The decolorization, degradation and mineralization efficiencies were used as response variables. The following conditions were found to be optimal for decolorization and mineralization of yellow 5:UV radiation of 365 nm (4W. one lamp), dye concentration of 200 mg/L, Fe2+ concentration of 1.0 mM, H2O2 concentration of 1.75 mL/L, treatment time of 180 min, Fe2+ concentration of 1 mM and pH = 3. Under these conditions (180 min), the photo-Fenton process allowed us to reach ca. 100% of color dye degradation, 99% of COD degradation, and 85% of mineralization (TOC). The scavenging effect of the CI- anion on the photodegradation process was also confirmed. (C) 2015 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.Ítem Degradación de Colorante Amarillo 12 de Aguas Residuales Industriales utilizando Hierro Cero Valente, Peróxido de Hidrógeno y Radiación Ultravioleta(Centro de Informacion Tecnologica, 2016-01-01) Gilpavas, E.; Medina, J.; Dobrosz-Gómez, I.; Gómez, M.Á.; Gilpavas, E.; Medina, J.; Dobrosz-Gómez, I.; Gómez, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)The Fenton heterogeneous process in a fluidized bed reactor using Zero Valent Iron (ZVI), in the metallic state, for the treatment of textile wastewater has been used an analyzed. The aim of this work was to optimize the following operating parameters: initial dye concentration, H2O2 concentration, pH, amount of ZVI, and UV radiation, for the removal of dye and organic matter. At first, a fractional factorial experimental design allows defining the most influential factors. After that, they were optimized using the Response Surface Methodology coupled to the Box-Behnken experimental design. The optimal conditions were found to be as follows: initial dye concentration, 881 mg/L; pH 5; ZVI concentration, 5,31 g/L; H2O2 concentration, 0,86 mL/L. At these conditions, the degradation kinetics was performed, reaching 100% and 80,83% of dye and chemical oxygen demand respectively, in 150 minutes of reaction.Ítem Degradación de colorantes de aguas residuales empleando UV/TiO2/H2O2/Fe2(Fondo Editorial Universidad EAFIT, 2007-03-01) Gil, Edison Hernán; Gil, Edison Hernán; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Ítem Degradación y mineralización de tartrazina mediante electrooxidación. Optimización de las condiciones de operación(Centro de Informacion Tecnologica, 2014-01-01) Gilpavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Gilpavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)In this work, the operational conditions of the tartrazine electro-oxidation (EO) process were optimized. The batch reactor used has two electrodes: one made of diamond doped with boron and the other one of titanium, working at monopolar configuration. The initial dyestuff concentration (Ci), the current density (i) and the pH were defined as the main factors affecting the EO. Their optimal values were found as follows: Ci=30 ppm, i=5mA/cm2 and pH=6.0. At these conditions, a kinetic analysis was performed in the terms of: the percentage of the dyestuff decolorization (%DC), the percentage of the chemical oxygen demand (%DCOD), and the percentage of the total organic carbon (%TOC). Additionally, the effect of Fe2+ (electro- Fenton process, EF) and Fe2+/UV radiation (electro-photo-Fenton process, EFF) on the studied process were evaluated. The work demonstrates the validity of the hypothesis about the most significant parameters that affect the EO process.Ítem Degradation of Yellow 12 Dye in Industrial Wastewater using Zero-Valent Iron, Hydrogen Peroxide and Ultraviolet Radiation(Centro de Informacion Tecnologica, 2016-09-17) GIL PAVAS EDISON; Medina, J.; Dobrosz-Gómez, I.; Gómez, Miguel Angel; GIL PAVAS EDISON; Medina, J.; Dobrosz-Gómez, I.; Gómez, Miguel Angel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)The Fenton heterogeneous process in a fluidized bed reactor using Zero Valent Iron (ZVI), in the metallic state, for the treatment of textile wastewater has been used an analyzed. The aim of this work was to optimize the following...Ítem Development of simulation metamodels to predict the performance and exhaust emission parameters of a spark ignition engine(Springer-Verlag France, 2019-01-01) Zutta E.; Acosta D.; Duque A.; Diaz A.; Zutta E.; Acosta D.; Duque A.; Diaz A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Developing more energy-efficient and environmentally friendly transportation technologies, that can enable to use significantly less petroleum and to reduce regulated emissions while meeting or exceeding drivers’ performance expectations, has always been one of the main challenges in automotive technology. Therefore, based on an experimental dataset, metamodels were generated using design of computer experiments and central composite design technique in order to accurately predict carbon monoxide (CO), oxides of nitrogen (NO x), hydrocarbon (HC) and carbon dioxide (CO 2) emissions, mean effective pressure and exergy destruction due to heat transfer and combustion process. Combustion metamodels was evaluated varying air–fuel ratio, ignition timing [(°CAD) Crank Angle Degrees], compression ratio, and combustion duration (°) on the performance of a Spark Ignition (SI) engine at constant speed of 750 rpm. Because SI gasoline engines always encounter the decreased thermal efficiency and increased toxic emissions at idle (Jurgen in Automotive electronics handbook, McGraw-Hill, New York, 1995). The Akaike information criterion was applied to automatically select the best metamodel for each case. © 2019, Springer-Verlag France SAS, part of Springer Nature.Ítem DISEÑO Y MONTAJE DE UN EQUIPO PARA LA EXTRACCIÓN DE ACEITES ESENCIALES, A ESCALA PILOTO.(IMPRENTA UNIV ANTIOQUIA, 2000-04-01) Gil, Edison Hernán; Gil, Edison Hernán; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Ítem Efficient Treatment for Textile Wastewater through Sequential Electrocoagulation, Electrochemical Oxidation and Adsorption Processes: Optimization and toxicity(Elsevier BV, 2020-09-05) Gil, E.; Gómez-García, Miguel A.; Dobrosz-Gómez, Izabela; Gil, E.; Gómez-García, Miguel A.; Dobrosz-Gómez, Izabela; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Ítem Efficient treatment for textile wastewater through sequential electrocoagulation, electrochemical oxidation and adsorption processes: Optimization and toxicity assessment(Elsevier BV, 2020-01-01) GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)In this work, the sequential Electrocoagulation + Electro-oxidation + Activated carbon adsorption (EC + EO + AC) process was studied as an alternative for the treatment of an industrial textile wastewater (TWW) issuing from a manufacturing company located in Medellín (Colombia). The EC's and EO's operational conditions were optimized using a Box-Behnken experimental design, the Response Surface Methodology and a constrained nonlinear optimization algorithm in terms of organic matter degradation efficiency. The best performance for EC (i. e., dye removal = 94%, COD and TOC degradation of 45 and 40%, respectively) was obtained using Fe anode and Boron Doped Diamond (BDD) cathode, with current density, jEC, equals to 5 mA/cm2, pH = 9.3, 60 RPM and 10 min of electrolysis. After EC treatment, the effluent biodegradability (evaluated as the BOD5/COD ratio) increases from 0.14 to 0.23. Regrettably, EC was not effective for the removal of acute toxicity to Artemia salina since the treated effluent remained very toxic (100%). The treatment of EC's effluent by EO enhanced organic pollutant removal. For EC + EO sequential process, EO optimal operational conditions (jEO = 10 mA/cm2, pH = 3, 240 RPM, BDD as anode and Fe as cathode) allowed reduction of 100% of color, 88% of COD and 79% of TOC after 30 min of electrolysis. Moreover, the BOD5/COD ratio increased from 0.23 to 0.58; however, the treated effluent remained very toxic to the Artemia salina. Consequently, an activated carbon adsorption step was included to complete the treatment process. Thus, by coupling the EC + EO + AC process, effluent's acute toxicity decreased completely. From molecular weight distribution analysis, it was concluded that EC + EO was efficient in eliminating low molecular weight (< 5 kDa) compounds. Finally, the operation cost, which includes chemical reagents, electrodes, energy consumption, and sludge disposal, for the EC + EO + AC sequential process was estimated in 3.83 USD /m3. © 2020 Elsevier B.V.Ítem Electrochemical degradation of acid yellow 23 by anodic oxidation: optimization of operating parameters(American Society of Civil Engineers (ASCE), 2016-11-01) Gil, Edison Hernán; Gil, Edison Hernán; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)