Examinando por Materia "surface property"
Mostrando 1 - 5 de 5
Resultados por página
Opciones de ordenación
Ítem Design and construction of a transducer for bite force registration.(ELSEVIER SCI LTD, 2009-05-29) Isaza JF; Throckmorton GS; Roldán SI; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)This study describes the development of a system for quantification of human biting forces by (1) determining the mechanical properties of an epoxy resin reinforced with carbon fiber, (2) establishing the transducer's optimal dimensions to accommodate teeth of various widths while minimizing transducer thickness, and (3) determining the optimal location of strain gages using a series of mechanical resistance and finite element (FE) analyses. The optimal strain gage location was defined as the position that produced the least difference in strain pattern when the load was applied by teeth with two different surface areas. The result is a 7.3-mm-thick transducer with a maximum load capacity beyond any expected maximum bite force (1500N). This system includes a graphic interface that easily allows acquisition and registration of bite force by any health-sciences or engineering professional.Ítem Design and construction of a transducer for bite force registration.(ELSEVIER SCI LTD, 2009-05-29) Isaza JF; Throckmorton GS; Roldán SI; Universidad EAFIT. Departamento de Ingeniería de Diseño; Ingeniería de Diseño (GRID)This study describes the development of a system for quantification of human biting forces by (1) determining the mechanical properties of an epoxy resin reinforced with carbon fiber, (2) establishing the transducer's optimal dimensions to accommodate teeth of various widths while minimizing transducer thickness, and (3) determining the optimal location of strain gages using a series of mechanical resistance and finite element (FE) analyses. The optimal strain gage location was defined as the position that produced the least difference in strain pattern when the load was applied by teeth with two different surface areas. The result is a 7.3-mm-thick transducer with a maximum load capacity beyond any expected maximum bite force (1500N). This system includes a graphic interface that easily allows acquisition and registration of bite force by any health-sciences or engineering professional.Ítem The limiting layer of fish scales: Structure and properties(ELSEVIER SCI LTD, 2018-02-01) Arola D.; Murcia S.; Stossel M.; Pahuja R.; Linley T.; Devaraj A.; Ramulu M.; Ossa E.A.; Wang J.; Arola D.; Murcia S.; Stossel M.; Pahuja R.; Linley T.; Devaraj A.; Ramulu M.; Ossa E.A.; Wang J.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de IngenieríaFish scales serve as a flexible natural armor that have received increasing attention across the materials community. Most efforts in this area have focused on the composite structure of the predominately organic elasmodine, and limited work addresses the highly mineralized external portion known as the Limiting Layer (LL). This coating serves as the first barrier to external threats and plays an important role in resisting puncture. In this investigation the structure, composition and mechanical behavior of the LL were explored for three different fish, including the arapaima (Arapaima gigas), the tarpon (Megalops atlanticus) and the carp (Cyprinus carpio). The scales of these three fish have received the most attention within the materials community. Features of the LL were evaluated with respect to anatomical position to distinguish site-specific functional differences. Results show that there are significant differences in the surface morphology of the LL from posterior and anterior regions in the scales, and between the three fish species. The calcium to phosphorus ratio and the mineral to collagen ratios of the LL are not equivalent among the three fish. Results from nanoindentation showed that the LL of tarpon scales is the hardest, followed by the carp and the arapaima and the differences in hardness are related to the apatite structure, possibly induced by the growth rate and environment of each fish.STATEMENT OF SIGNIFICANCE: The natural armor of fish, turtles and other animals, has become a topic of substantial scientific interest. The majority of investigations have focused on the more highly organic layer known as the elasmodine. The present study addresses the highly mineralized external portion known as the Limiting Layer (LL). Specifically, the structure, composition and mechanical behavior of the LL were explored for three different fish, including the arapaima (Arapaima gigas), the tarpon (Megalops atlanticus) and the carp (Cyprinus carpio). Results show that there are significant differences in the surface morphology of the LL from posterior and anterior regions in the scales, and between the three species. In addition, the composition of the LL is also unique among the three fish. Results from nanoindentation showed that the LL of tarpon scales is the hardest, followed by the carp and the arapaima and the differences in hardness are related to the apatite structure, possibly induced by the growth rate and environment of each fish. In addition, a new feature was indentified in the LL, which has not been discussed before. As such, we feel this work is unique and makes a significant contribution to the field. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.Ítem Structural characterization of the (methanol)4 potential energy surface(AMER CHEMICAL SOC, 2009-09-24) David, Jorge; Guerra, Doris; Restrepo, Albeiro; Universidad EAFIT. Departamento de Ciencias Básicas; Electromagnetismo Aplicado (Gema)In this paper, we report the geometries and properties of the structural isomers obtained from a random walk of the potential energy surface (PES) of the methanol tetramer. Thirty-three structures were obtained after B3LYP/6-31+g* optimization of 94 candidate structures generated from a stochastic search of the PM3 conformational space. The random search was carried out using a recently proposed modified Metropolis acceptance test in the simulated annealing (SA) procedure. Corrections for the basis set superposition error (BSSE) show improvements on the binding energies of the clusters in an average of approximately 2.0 kcal/mol, while geometries are predicted to be less sensitive to BSSE corrections. MP2/aug-cc-pvdz calculations on representative structures did not change the geometries but predicted better binding energies. Highly correlated CCSD(T) energies were calculated on the B3LYP and MP2 stationary points and used to establish relative stabilities. We report several new conformations and group the structures into six distinct geometrical motifs. Only the cyclic tetramers with four primary hydrogen bonds in the same plane are predicted to have significant populations. Secondary hydrogen bonds, those for which the donated proton comes from an alkyl group, lead to a rich conformational space.Ítem Time dependent deformation behavior of dentin(PERGAMON-ELSEVIER SCIENCE LTD, 2017-04-01) Montoya C; Arola D; Ossa EA; Montoya C; Arola D; Ossa EA; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de IngenieríaObjective The viscoelastic behavior of dentin and its ability to undergo time dependent deformation are considered to be important to oral functions and its capacity to resist fracture. There are spatial variations in the microstructure of dentin within the crown, which could be important to the viscous behavior. However, a spatially resolved description for the viscoelastic behavior of coronal dentin has not been reported. Methods In this investigation spherical indentations were made in three regions of coronal dentin including the outer, middle and inner regions. Power law relations were developed to quantitatively describe the stress-strain responses of the tissue. Results Results showed that the deformation behavior was strongly dependent on the composition (mineral to collagen ratio) and microstructure (tubule density), which contributed to an increase in the rate of viscous deformation with increasing proximity to the pulp. Conclusions A model accounting for spatial variations in composition and microstructure was developed to describe the steady-state time dependent deformation behavior of coronal dentin, and a good agreement was found with the experimental results. © 2017 Elsevier Ltd