Examinando por Materia "Titanium dioxides (TiO2)"

Mostrando 1 - 2 de 2
  • No hay miniatura disponible
    Ítem
    Comparison of TiO2 targets manufactured by APS and sintering processes for PAPVD coatings suitable in technological and medical applications
    (ASM International, 2018-01-01) Jaramillo Raquejo D.; Palacio C.C.; Ageorges H.; Jaramillo Raquejo D.; Palacio C.C.; Ageorges H.; Universidad EAFIT. Departamento de Ciencias; Electromagnetismo Aplicado (Gema)
    In surface science of functional oxides, Titanium dioxide (TiO2) is one of the most investigated crystalline systems either in rutile or anatase phases. Rutile phase is widely used in microelectronic, tribological applications and in the conversion of solar energy. Anatase phase is used in self-cleaning, antifogging, photo-catalytic and biomedical technologies. This work focuses on studying the required process conditions to obtain TiO2 targets by APS onto metallic substrates using commercial TiO2 powders (Oerlikon Metco in Switzerland) with suitable physical and chemical properties for technological and medical applications as PAPVD coatings. APS targets were compared to sintered ones. The raw powders were characterized by laser diffraction, SEM, XRF and XRD while the characteristics of the APS-deposited targets as well as the sintered ones were determined by SEM and XRD to identify the constituent phases. This work allowed confirming the advantages and limitations of both processes in terms of grain size, chemical composition, microstructural homogeneity and density in order to choose the best option to manufacture targets for PAPVD coatings for technological and medical applications. © 2018 ASM International® All rights reserved.
  • No hay miniatura disponible
    Ítem
    Study of APS and conventional sintering parameters for the manufacture of TiO2 targets for PAPVD
    (IOP PUBLISHING LTD, 2019-01-01) Jaramillo Raquejo D.; Palacio C.C.; Ageorges H.; Jaramillo Raquejo D.; Palacio C.C.; Ageorges H.; Universidad EAFIT. Departamento de Ciencias; Electromagnetismo Aplicado (Gema)
    In surface science of functional oxides, titanium dioxide (TiO2) is one of the most investigated crystalline systems either in rutile or anatase phases. In this work commercial TiO2 powders are used to study the required process conditions to obtain TiO2 targets by Atmospheric Plasma Spray (APS) and conventional sintering, with suitable physical and chemical properties to be source material for Plasma Assisted Physical Vapor Deposition (PAPVD) for technological and medical applications. Two three factor Box Behnken experimental designs combined with surface modeling were employed to estimate the influence of spraying parameters (gun current, Ar/H2 ratio and standoff distance) and sintering parameters (heating rate, sintering temperature and holding time) within the targets microstructure (cracks and pores in cross section) and phases composition. The microstructure and composition of APS-deposited targets and sintered ones were characterized by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). The lowest defects percentages of the targets manufactured in this work were 0.41 ± 0.30 % for APS-deposited targets and 0.05 ± 0.04 % for the sintered ones using the optimal parameters suggested by the statistical model, which allowed confirming the advantages of sintering process and limitations of APS in terms of microstructural homogeneity, but also of the use of design of experiments in the modeling of systems of many variables when there is not diagnostic equipment of the processes available. © Published under licence by IOP Publishing Ltd.