Examinando por Materia "Mechanical design"
Mostrando 1 - 3 de 3
Resultados por página
Opciones de ordenación
Ítem Modeling, simulation and test of the heat flow in a liquid nitrogen cryostat for Mössbauer spectroscopy(IOP PUBLISHING LTD, 2019-01-01) Gutiérrez N.A.; Velásquez A.A.; Gutiérrez N.A.; Velásquez A.A.; Universidad EAFIT. Departamento de Ciencias; Electromagnetismo Aplicado (Gema)In this work, we present a heat flow analysis for a conceptual design of an open cycle liquid nitrogen cryostat with application in Mössbauer spectroscopy. Initially, we made a study of the different configurations of Dewar type cryostats reported in the literature. These configurations are based on existing designs and the Mössbauer spectrometer requirements of the Instrumentation and Spectroscopy Laboratory at Universidad EAFIT in Medellin. From this study, we establish our own conceptual design. A first heat flow analysis in stationary state was calculated to obtain the dimensions of the reservoir vessel. The heat flow model obtained predicted an adequate evaporation time of the liquid nitrogen for the acquisition of Mössbauer spectra. For this model we employed the Fourier's law, the heat flow by radiation in grey bodies and the properties of 304 stainless steel, 6061 aluminium alloy and OFHC copper. In consequence, the mechanical design of the cryostat was defined and the new heat loads associated with it were added to the initial model. Finally, the prototype was built, the model was tested and some final corrections were made. © Published under licence by IOP Publishing Ltd.Ítem Status of the EMIR mechanical system(SPIE-INT SOC OPTICAL ENGINEERING, 2006-06-28) Sánchez, V.; Barrera, S.; Becerril, S.; Correa, S.; Pérez, J.; Redondo, P.; Restrepo, R.; Saavedra, P.; Tenegi, F.; Patrón, J.; Garzón, F.; Universidad EAFIT. Departamento de Ciencias Básicas; Óptica AplicadaEMIR is the NIR multi-object imager and spectrograph for the GTC (Gran Telescopic Canarias). The instrument ADR (Advanced Design Review) was held successfully in March 2006. During the AD phase, a number of mechanical concepts were tested on development prototypes to ensure the feasibility of the PDR proposed designs. This presentation contains an overview of the current mechanical status of the instrument, as well as the prototypes development. It contains the prototype tests results of the collimator first lens barrel, the support trusses, the grisms wheel and the demonstration programme for the cryogenic reconfigurable slit mechanism.Ítem Verification and validation of finite element model of a human powered vehicle chassis = International Journal on Interactive Design and Manufacturing (IJIDeM)(Universidad EAFIT, 2019) Urrego Villegas, Carlos Andrés; Zapata Múnera, Abraham Uriel; Zapata Múnera, Abraham Uriel