Examinando por Materia "molar tooth"
Mostrando 1 - 6 de 6
Resultados por página
Opciones de ordenación
Ítem Biomechanics of the canine mandible during bone transport distraction osteogenesis(ASME, 2014-11-01) Zapata, Uriel; Dechow, Paul C.; Watanabe, Ikuya; Elsalanty, Mohammed E.; Opperman, Lynne A.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)This study compared biomechanical patterns between finite element models (FEMs) and a fresh dog mandible tested under molar and incisal physiological loads in order to clarify the effect of the bone transport distraction osteogenesis (BTDO) surgical process. Three FEMs of dog mandibles were built in order to evaluate the effects of BTDO. The first model evaluated the mandibular response under two physiological loads resembling bite processes. In the second model, a 5.0 cm bone defect was bridged with a bone transport reconstruction plate (BTRP). In the third model, new regenerated bony tissue was incorporated within the defect to mimic the surgical process without the presence of the device. Complementarily, a mandible of a male American foxhound dog was mechanically tested in the laboratory both in the presence and absence of a BTRP, and mechanical responses were measured by attaching rosettes to the bone surface of the mandible to validate the FEM predictions. The relationship between real and predicted values indicates that the stress patterns calculated using FEM are a valid predictor of the biomechanics of the BTDO procedures. The present study provides an interesting correlation between the stiffness of the device and the biomechanical response of the mandible affected for bone transport. Copyright © 2014 by ASME.Ítem Biomechanics of the canine mandible during bone transport distraction osteogenesis(ASME, 2014-11-01) Zapata, Uriel; Dechow, Paul C.; Watanabe, Ikuya; Elsalanty, Mohammed E.; Opperman, Lynne A.; Zapata, Uriel; Dechow, Paul C.; Watanabe, Ikuya; Elsalanty, Mohammed E.; Opperman, Lynne A.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de IngenieríaThis study compared biomechanical patterns between finite element models (FEMs) and a fresh dog mandible tested under molar and incisal physiological loads in order to clarify the effect of the bone transport distraction osteogenesis (BTDO) surgical process. Three FEMs of dog mandibles were built in order to evaluate the effects of BTDO. The first model evaluated the mandibular response under two physiological loads resembling bite processes. In the second model, a 5.0 cm bone defect was bridged with a bone transport reconstruction plate (BTRP). In the third model, new regenerated bony tissue was incorporated within the defect to mimic the surgical process without the presence of the device. Complementarily, a mandible of a male American foxhound dog was mechanically tested in the laboratory both in the presence and absence of a BTRP, and mechanical responses were measured by attaching rosettes to the bone surface of the mandible to validate the FEM predictions. The relationship between real and predicted values indicates that the stress patterns calculated using FEM are a valid predictor of the biomechanics of the BTDO procedures. The present study provides an interesting correlation between the stiffness of the device and the biomechanical response of the mandible affected for bone transport. Copyright © 2014 by ASME.Ítem The global impact of sutures assessed in a finite element model of a macaque cranium(WILEY-LISS, 2010-09-01) Wang, Qian; Smith, Amanda L.; Strait, David S.; Wright, Barth W.; Richmond, Brian G.; Grosse, Ian R.; Byron, Craig D.; Zapata, Uriel; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)The biomechanical significance of cranial sutures in primates is an open question because their global impact is unclear, and their material properties are difficult to measure. In this study, eight suture-bone functional units representing eight facial sutures were created in a finite element model of a monkey cranium. All the sutures were assumed to have identical isotropic linear elastic material behavior that varied in different modeling experiments, representing either fused or unfused sutures. The values of elastic moduli employed in these trials ranged over several orders of magnitude. Each model was evaluated under incisor, premolar, and molar biting conditions. Results demonstrate that skulls with unfused sutures permitted more deformations and experienced higher total strain energy. However, strain patterns remained relatively unaffected away from the suture sites, and bite reaction force was likewise barely affected. These findings suggest that suture elasticity does not substantially alter load paths through the macaque skull or its underlying rigid body kinematics. An implication is that, for the purposes of finite element analysis, omitting or fusing sutures is a reasonable modeling approximation for skulls with small suture volume fraction if the research objective is to observe general patterns of craniofacial biomechanics under static loading conditions. The manner in which suture morphology and ossification affect the mechanical integrity of skulls and their ontogeny and evolution awaits further investigation, and their viscoelastic properties call for dynamic simulations. © 2010 Wiley-Liss, Inc.Ítem Indentation damage and crack repair in human enamel.(ELSEVIER SCIENCE BV, 2013-05-01) Rivera C; Arola D; Ossa A; Rivera C; Arola D; Ossa A; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de IngenieríaTooth enamel is the hardest and most highly mineralized tissue in the human body. While there have been a number of studies aimed at understanding the hardness and crack growth resistance behavior of this tissue, no study has evaluated if cracks in this tissue undergo repair. In this investigation the crack repair characteristics of young human enamel were evaluated as a function of patient gender and as a function of the distance from the Dentin Enamel Junction (DEJ). Cracks were introduced via microindentation along the prism direction and evaluated as a function of time after the indentation. Microscopic observations indicated that the repair of cracks began immediately after crack initiation and reaches saturation after approximately 48 h. During this process he crack length decreased up to 10% of the initial length, and the largest degree of reduction occurred in the deep enamel, nearest the DEJ. In addition, it was found that the degree of repair was significantly greater in the enamel of female patients.Ítem Reliability of maximum bite force measurements in age-varying populations(WILEY-BLACKWELL PUBLISHING, INC, 2009-11-01) RoldÁn, S.; Buschang, P.H.; Isaza Saldarriaga, J.F.; Throckmorton, G.; Universidad EAFIT. Departamento de Ingeniería de Diseño; Ingeniería de Diseño (GRID)Summary In order for bite forces to be used clinically, they must be reliable. While bite force transducers are accurate and precise during bench tests, widely varying reliabilities of intra-oral bite forces have been reported when measured in human subjects. Because few studies have reported total reliability, the clinical use of intra-oral bite forces measurements remains questionable. The purposes of this study were to (i) estimate total reliability, including both within- and between-session reliabilities, of repeated maximum incisor and molar bite force measurements and (ii) demonstrate how extraneous variation affects reliability by comparing estimates for which the effects of age have and have not been controlled. A sample of 28 healthy subjects with Class I normal occlusion (seven subjects in each of four age groups: 5, 8, 11 and 14 years) performed two sessions approximately 90 min apart. Each session consisted of three maximum voluntary bites at three bite positions (incisor and right and left molars). For each bite position, between-subject variance (true variance), between-session variance and within-session variance were calculated using Multilevel modelling procedures. The variances were used to estimate between-session reliabilities, within-session reliabilities and total reliabilities. Within-session reliabilities were substantially higher than between-session reliabilities, which in turn was higher than total reliabilities at all bite positions. Reliabilities were highest at the incisor bite position. Not controlling for age effects substantially overestimated total reliability at all bite positions. After controlling for age effects, total reliabilities of repeated maximum bite forces were low to moderate. © 2009 Blackwell Publishing Ltd.Ítem Reliability of maximum bite force measurements in age-varying populations(WILEY-BLACKWELL PUBLISHING, INC, 2009-11-01) RoldÁn, S.; Buschang, P.H.; Isaza Saldarriaga, J.F.; Throckmorton, G.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Bioingeniería GIB (CES – EAFIT)Summary In order for bite forces to be used clinically, they must be reliable. While bite force transducers are accurate and precise during bench tests, widely varying reliabilities of intra-oral bite forces have been reported when measured in human subjects. Because few studies have reported total reliability, the clinical use of intra-oral bite forces measurements remains questionable. The purposes of this study were to (i) estimate total reliability, including both within- and between-session reliabilities, of repeated maximum incisor and molar bite force measurements and (ii) demonstrate how extraneous variation affects reliability by comparing estimates for which the effects of age have and have not been controlled. A sample of 28 healthy subjects with Class I normal occlusion (seven subjects in each of four age groups: 5, 8, 11 and 14 years) performed two sessions approximately 90 min apart. Each session consisted of three maximum voluntary bites at three bite positions (incisor and right and left molars). For each bite position, between-subject variance (true variance), between-session variance and within-session variance were calculated using Multilevel modelling procedures. The variances were used to estimate between-session reliabilities, within-session reliabilities and total reliabilities. Within-session reliabilities were substantially higher than between-session reliabilities, which in turn was higher than total reliabilities at all bite positions. Reliabilities were highest at the incisor bite position. Not controlling for age effects substantially overestimated total reliability at all bite positions. After controlling for age effects, total reliabilities of repeated maximum bite forces were low to moderate. © 2009 Blackwell Publishing Ltd.