Examinando por Materia "Textile wastewater"

Mostrando 1 - 3 de 3
  • No hay miniatura disponible
    Ítem
    Assessment of the optimized treatment of indigo-polluted industrial textile wastewater by a sequential electrocoagulation-activated carbon adsorption process
    (Elsevier Ltd, 2020-01-01) GilPavas E.; Correa-Sanchez S.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
    Wastewater collected from a local jean manufacturing plant was treated using an electrocoagulation process (EC) coupled with activated carbon (AC) adsorption. The process variables were optimized using multivariate regression coupled with nonlinear programming with nonlinear restrictions to achieve the lowest possible cost while keeping a high enough degradation rate for chemical oxygen demand (COD), color, and turbidity to fulfill the Colombian environmental regulation requirements. Under optimal conditions (pH = 5.4, s =2 mS/cm, j =14 mA/cm2, and t = 11 min) color, COD, and TOC removals of 95%, 63%, and 51%, respectively, were achieved. The biodegradability index also increased from 0.13 to 0.29, whereas toxicity tests showed a remaining toxicity of 45%. A kinetic study was conducted for the EC process. The activated carbon (AC) adsorption process was successfully used to completely remove toxicity, while further increasing color, COD, and TOC removals to 96%, 72%, and 61%, respectively. The conditions for the AC adsorption process (20 g/L of AC and 1 h) were determined by experimental adsorption isotherms and kinetic studies. The optimized EC/AC process led to an effluent satisfying the Colombian regulations and seems technologically viable with lower costs than other similar process that were reported in previous works. © 2020 Elsevier Ltd
  • No hay miniatura disponible
    Ítem
    Assessment of the optimized treatment of indigo-polluted industrial textile wastewater by a sequential electrocoagulation-activated carbon adsorption process
    (Elsevier Ltd, 2020-01-01) GilPavas E.; Correa-Sanchez S.; GilPavas E.; Correa-Sanchez S.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
    Wastewater collected from a local jean manufacturing plant was treated using an electrocoagulation process (EC) coupled with activated carbon (AC) adsorption. The process variables were optimized using multivariate regression coupled with nonlinear programming with nonlinear restrictions to achieve the lowest possible cost while keeping a high enough degradation rate for chemical oxygen demand (COD), color, and turbidity to fulfill the Colombian environmental regulation requirements. Under optimal conditions (pH = 5.4, s =2 mS/cm, j =14 mA/cm2, and t = 11 min) color, COD, and TOC removals of 95%, 63%, and 51%, respectively, were achieved. The biodegradability index also increased from 0.13 to 0.29, whereas toxicity tests showed a remaining toxicity of 45%. A kinetic study was conducted for the EC process. The activated carbon (AC) adsorption process was successfully used to completely remove toxicity, while further increasing color, COD, and TOC removals to 96%, 72%, and 61%, respectively. The conditions for the AC adsorption process (20 g/L of AC and 1 h) were determined by experimental adsorption isotherms and kinetic studies. The optimized EC/AC process led to an effluent satisfying the Colombian regulations and seems technologically viable with lower costs than other similar process that were reported in previous works. © 2020 Elsevier Ltd
  • No hay miniatura disponible
    Ítem
    Decolorization and mineralization of Diarylide Yellow 12 (PY12) by photo-Fenton process: the Response Surface Methodology as the optimization tool.
    (IWA PUBLISHING, 2012-01-01) GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
    The Response Surface Methodology (RSM) was applied as a tool for the optimization of the operational conditions of the photo-degradation of highly concentrated PY12 wastewater, resulting from a textile industry located in the suburbs of Medellin (Colombia). The Box-Behnken experimental Design (BBD) was chosen for the purpose of response optimization. The photo-Fenton process was carried out in a laboratory-scale batch photo-reactor. A multifactorial experimental design was proposed, including the following variables: the initial dyestuff concentration, the H(2)O(2) and the Fe(+2) concentrations, as well as the UV wavelength radiation. The photo-Fenton process performed at the optimized conditions resulted in ca. 100% of dyestuff decolorization, 92% of COD and 82% of TOC degradation. A kinetic study was accomplished, including the identification of some intermediate compounds generated during the oxidation process. The water biodegradability reached a final DBO(5)/DQO = 0.86 value.