Examinando por Materia "Tensile strength"

Mostrando 1 - 2 de 2
  • No hay miniatura disponible
    Ítem
    Effect of chemical composition and microstructure on the mechanical behavior of fish scales from Megalops Atlanticus
    (ELSEVIER SCIENCE BV, 2016-03-01) Gil-Duran, S.; Arola, D.; Ossa, E.A.; Gil-Duran, S.; Arola, D.; Ossa, E.A.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
    This paper presents an experimental study of the composition, microstructure and mechanical behavior of scales from the Megalops Atlanticus (Atlantic tarpon). The microstructure and composition were evaluated by Scanning Electron Microscopy (SEM) and RAMAN spectroscopy, respectively. The mechanical properties were evaluated in uniaxial tension as a function of position along the length of the fish (head, mid-length and tail). Results showed that the scales are composed of collagen and hydroxyapatite, and these constituents are distributed within three well-defined layers from the bottom to the top of the scale. The proportion of these layers with respect to the total scale thickness varies radially. The collagen fibers are arranged in plies with different orientations and with preferred orientation in the longitudinal direction of the fish. Results from the tensile tests showed that scales from Megalops Atlanticus exhibit variations in the elastic modulus as a function of body position. Additional testing performed with and without the highly mineralized top layers of the scale revealed that the mechanical behavior is anisotropic and that the highest strength was exhibited along the fish length. Furthermore, removing the top mineralized layers resulted in an increase in the tensile strength of the scale. © 2015 Elsevier Ltd.
  • No hay miniatura disponible
    Ítem
    PTFE as a toughness modifier of high-performance PEI/PBT blends: Morphology control during melt processing
    (John Wiley and Sons Ltd, 2021-02-01) Vásquez-Rendón M.; Álvarez-Láinez M.L.; Universidad EAFIT. Departamento de Ingeniería de Diseño; Ingeniería de Diseño (GRID)
    High-performance PEI/PBT blends are brittle because of phase distribution and blends densification. New morphologies developed by adding PTFE to PEI matrix during melt processing favor the toughness improvement of PEI/PBT blends. Ternary PEI/PBT/PTFE processability is not compromised by PTFE addition, and miscibility study by modulated differential scanning calorimetry and harmonic mean method shows that PTFE does not interfere with PEI and PBT interaction. Dual-phase and spore-like morphologies are formed for both PEI/PBT and PEI/PBT/PTFE blends, and they strongly influenced their mechanical performance. Although tensile strength of ternary blends does not decrease by PTFE addition, elongation at break deteriorates for blends with PEI concentrations <70 wt%. Nevertheless, blends with 80 wt% increase their ductility, and a synergic effect is observed in impact resistance results. PTFE acts as an impact modifier of PEI/PBT blends due to its distribution in the PEI matrix as debonded spheres and nanoparticles well-embedded in PEI matrix. © 2020 John Wiley & Sons Ltd