Examinando por Materia "Temperature distribution"

Mostrando 1 - 2 de 2
  • No hay miniatura disponible
    Ítem
    Spherical indentation behavior of asphalt mixtures
    (ASCE-AMER SOC CIVIL ENGINEERS, 2007-01-01) Ossa, E.A.; Collop, A.C.; Ossa, E.A.; Collop, A.C.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
    The spherical indentation response of a dense bitumen macadam asphalt mixture with two different volume fractions of bitumen binder is investigated both experimentally and via an analytical model. The model for the indentation of bitumen developed by Ossa et al. in 2005, was used to study the spherical indentation behavior of the mixtures with good agreement when compared to experimental results. An extensive experimental study of the monotonic and recovery spherical indentation behavior is reported for a range of temperatures. In line with the predictions of the model, the monotonic indentation response of the mixtures exhibits a power-law dependence on the indentation force. The model is also successful in capturing the indentation recovery behavior of the mixtures. A comparison of the material parameters obtained from uniaxial compression and indentation tests showed that indentation tests can be used in an easy and reliable way to obtain the fundamental asphalt parameters. Further, parameters found from indentation tests implicitly account for the confining conditions generated by the aggregate particles below the indenter. © 2007 ASCE.
  • No hay miniatura disponible
    Ítem
    Triaxial deformation behavior of bituminous mixes
    (ASCE-AMER SOC CIVIL ENGINEERS, 2010-02-01) Ossa, E. A.; Deshpande, V. S.; Cebon, D.; Ossa, E. A.; Deshpande, V. S.; Cebon, D.; Universidad EAFIT. Departamento de Ingeniería de Producción; Materiales de Ingeniería
    The triaxial compressive response of bituminous mixes with volume fractions of aggregate in the range 52 to 85% was investigated over a wide range stresses and strain rates. The types of loadings considered include triaxial monotonic constant stress and constant applied strain rate, as well as creep recovery, continuous cyclic, and stress pulse train loadings. The mixes with a "fully dense" aggregate skeleton were found to dilate under all loading conditions and the creep response of the mixes was dependent on both the deviatoric and hydrostatic stresses. By contrast, recovery was found to occur under zero applied deviatoric stresses with the recovery rate only dependent on the "recoverable strain" and independent of any superimposed hydrostatic stress. Continuous and pulse loading cyclic stress-controlled tests showed that the response of the mixes was governed by the mean applied deviatoric stress in the continuous cyclic tests while strain recovery was important in the pulse loading tests. A phenomenological constitutive model was proposed to fit the measured triaxial response of the bituminous mixes and shown to capture the measurements over all the triaxial stress states and loading time histories investigated here. Furthermore, the model was extended to capture the temperature dependence of the mixtures which is governed by the temperature dependence of the bitumen binder. © 2010 ASCE.