Examinando por Materia "Tartrazine"

Mostrando 1 - 2 de 2
  • No hay miniatura disponible
    Ítem
    Decolorization and mineralization of yellow 5 (E102) by UV/Fe2+/H2O2 process. Optimization of the operational conditions by response surface methodology
    (Elsevier Masson SAS, 2015-10-01) GilPalvas, E.; Gómez, C.M.; Rynkowski, J.M.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; GilPalvas, E.; Gómez, C.M.; Rynkowski, J.M.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
    In this study, the optimization and implementation of a homogeneous photo-Fenton process for the decolorization and mineralization of a wastewater containing highly concentrated yellow 5 (E102) dye, resulting from an industry placed in the suburbs of Medellin (Colombia), is presented. Response surface methodology was applied as a tool for the optimization of operational conditions such as initial dyestuff concentration. H2O2 concentration, and UV-radiation power (number of lamps). The decolorization, degradation and mineralization efficiencies were used as response variables. The following conditions were found to be optimal for decolorization and mineralization of yellow 5:UV radiation of 365 nm (4W. one lamp), dye concentration of 200 mg/L, Fe2+ concentration of 1.0 mM, H2O2 concentration of 1.75 mL/L, treatment time of 180 min, Fe2+ concentration of 1 mM and pH = 3. Under these conditions (180 min), the photo-Fenton process allowed us to reach ca. 100% of color dye degradation, 99% of COD degradation, and 85% of mineralization (TOC). The scavenging effect of the CI- anion on the photodegradation process was also confirmed. (C) 2015 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.
  • No hay miniatura disponible
    Ítem
    Degradación y mineralización de tartrazina mediante electrooxidación. Optimización de las condiciones de operación
    (Centro de Informacion Tecnologica, 2014-01-01) Gilpavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Gilpavas, E.; Dobrosz-Gómez, I.; Gómez-García, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
    In this work, the operational conditions of the tartrazine electro-oxidation (EO) process were optimized. The batch reactor used has two electrodes: one made of diamond doped with boron and the other one of titanium, working at monopolar configuration. The initial dyestuff concentration (Ci), the current density (i) and the pH were defined as the main factors affecting the EO. Their optimal values were found as follows: Ci=30 ppm, i=5mA/cm2 and pH=6.0. At these conditions, a kinetic analysis was performed in the terms of: the percentage of the dyestuff decolorization (%DC), the percentage of the chemical oxygen demand (%DCOD), and the percentage of the total organic carbon (%TOC). Additionally, the effect of Fe2+ (electro- Fenton process, EF) and Fe2+/UV radiation (electro-photo-Fenton process, EFF) on the studied process were evaluated. The work demonstrates the validity of the hypothesis about the most significant parameters that affect the EO process.