Examinando por Materia "Modeling and simulation"
Mostrando 1 - 4 de 4
Resultados por página
Opciones de ordenación
Ítem Approximation of the mechanical response of large lattice domains using homogenization and design of experiments(Universitatea Politehnica Bucuresti, 2020-01-01) Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de ProcesosLattice-based workpieces contain patterned repetition of individuals of a basic topology (Schwarz, ortho-walls, gyroid, etc.) with each individual having distinct geometric grading. In the context of the design, analysis and manufacturing of lattice workpieces, the problem of rapidly assessing the mechanical behavior of large domains is relevant for pre-evaluation of designs. In this realm, two approaches can be identified: (1) numerical simulations which usually bring accuracy but limit the size of the domains that can be studied due to intractable data sizes, and (2) material homogenization strategies that sacrifice precision to favor efficiency and allow for simulations of large domains. Material homogenization synthesizes diluted material properties in a lattice, according to the volume occupancy factor of such a lattice. Preliminary publications show that material homogenization is reasonable in predicting displacements, but is not in predicting stresses (highly sensitive to local geometry). As a response to such shortcomings, this paper presents a methodology that systematically uses design of experiments (DOE) to produce simple mathematical expressions (meta-models) that relate the stress-strain behavior of the lattice domain and the displacements of the homogeneous domain. The implementation in this paper estimates the von Mises stress in large Schwarz primitive lattice domains under compressive loads. The results of our experiments show that (1) material homogenization can efficiently and accurately approximate the displacements field, even in complex lattice domains, and (2) material homogenization and DOE can produce rough estimations of the von Mises stress in large domains (more than 100 cells). The errors in the von Mises stress estimations reach 42% for domains of up to 24 cells. This result means that coarse stress-strain estimations may be possible in lattice domains by combining DOE and homogenized material properties. This option is not suitable for precise stress prediction in sensitive contexts wherein high accuracy is needed. Future work is required to refine the meta-models to improve the accuracies of the estimations. © 2020 by the authors.Ítem Approximation of the mechanical response of large lattice domains using homogenization and design of experiments(Universitatea Politehnica Bucuresti, 2020-01-01) Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Laboratorio CAD/CAM/CAELattice-based workpieces contain patterned repetition of individuals of a basic topology (Schwarz, ortho-walls, gyroid, etc.) with each individual having distinct geometric grading. In the context of the design, analysis and manufacturing of lattice workpieces, the problem of rapidly assessing the mechanical behavior of large domains is relevant for pre-evaluation of designs. In this realm, two approaches can be identified: (1) numerical simulations which usually bring accuracy but limit the size of the domains that can be studied due to intractable data sizes, and (2) material homogenization strategies that sacrifice precision to favor efficiency and allow for simulations of large domains. Material homogenization synthesizes diluted material properties in a lattice, according to the volume occupancy factor of such a lattice. Preliminary publications show that material homogenization is reasonable in predicting displacements, but is not in predicting stresses (highly sensitive to local geometry). As a response to such shortcomings, this paper presents a methodology that systematically uses design of experiments (DOE) to produce simple mathematical expressions (meta-models) that relate the stress-strain behavior of the lattice domain and the displacements of the homogeneous domain. The implementation in this paper estimates the von Mises stress in large Schwarz primitive lattice domains under compressive loads. The results of our experiments show that (1) material homogenization can efficiently and accurately approximate the displacements field, even in complex lattice domains, and (2) material homogenization and DOE can produce rough estimations of the von Mises stress in large domains (more than 100 cells). The errors in the von Mises stress estimations reach 42% for domains of up to 24 cells. This result means that coarse stress-strain estimations may be possible in lattice domains by combining DOE and homogenized material properties. This option is not suitable for precise stress prediction in sensitive contexts wherein high accuracy is needed. Future work is required to refine the meta-models to improve the accuracies of the estimations. © 2020 by the authors.Ítem Approximation of the mechanical response of large lattice domains using homogenization and design of experiments(Universitatea Politehnica Bucuresti, 2020-01-01) Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Montoya-Zapata D.; Acosta D.A.; Cortés C.; Pareja-Corcho J.; Moreno A.; Posada J.; Ruiz-Salguero O.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)Lattice-based workpieces contain patterned repetition of individuals of a basic topology (Schwarz, ortho-walls, gyroid, etc.) with each individual having distinct geometric grading. In the context of the design, analysis and manufacturing of lattice workpieces, the problem of rapidly assessing the mechanical behavior of large domains is relevant for pre-evaluation of designs. In this realm, two approaches can be identified: (1) numerical simulations which usually bring accuracy but limit the size of the domains that can be studied due to intractable data sizes, and (2) material homogenization strategies that sacrifice precision to favor efficiency and allow for simulations of large domains. Material homogenization synthesizes diluted material properties in a lattice, according to the volume occupancy factor of such a lattice. Preliminary publications show that material homogenization is reasonable in predicting displacements, but is not in predicting stresses (highly sensitive to local geometry). As a response to such shortcomings, this paper presents a methodology that systematically uses design of experiments (DOE) to produce simple mathematical expressions (meta-models) that relate the stress-strain behavior of the lattice domain and the displacements of the homogeneous domain. The implementation in this paper estimates the von Mises stress in large Schwarz primitive lattice domains under compressive loads. The results of our experiments show that (1) material homogenization can efficiently and accurately approximate the displacements field, even in complex lattice domains, and (2) material homogenization and DOE can produce rough estimations of the von Mises stress in large domains (more than 100 cells). The errors in the von Mises stress estimations reach 42% for domains of up to 24 cells. This result means that coarse stress-strain estimations may be possible in lattice domains by combining DOE and homogenized material properties. This option is not suitable for precise stress prediction in sensitive contexts wherein high accuracy is needed. Future work is required to refine the meta-models to improve the accuracies of the estimations. © 2020 by the authors.Ítem Modeling and simulation of an Underwater Remotely Operated Vehicle (ROV) for surveillance and inspection of port facilities using CFD tools(2008-01-01) Valencia, R.A.; Ramírez, J.A.; Gutiérrez, L.B.; García, M.J.; Valencia, R.A.; Ramírez, J.A.; Gutiérrez, L.B.; García, M.J.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecánica AplicadaThis article presents theoretical and computational studies with Computational Fluids Dynamics (CFD) tools of an Underwater Remotely Operated Vehicle (ROV), required to obtain reliable visual information, used for surveillance and maintenance of ship shells and underwater structures of Colombian port facilities. The thrust force is analyzed at the operational conditions by using CFD tools (FLUENT™, CFX™, COSMOSFLOW™) and the information about forces, torques and power of the vehicle's thrusters is obtained. The commercial propellers were modeled by using a reverse engineering process with a 3D scanner and Computer Aided Design (CAD) software (RAPIDFORM™). The results obtained with the CFD package allowed to evaluate several operating scenarios of the vehicle that are used for feedback purposes in the design process of the ROV before it be manufactured. Copyright © 2008 by ASME.