Examinando por Materia "Fatigue testing"
Mostrando 1 - 3 de 3
Resultados por página
Opciones de ordenación
Ítem Detection of structural damage and estimation of reliability using a multidimensional monitoring approach(SAGE PUBLICATIONS LTD, 2018-04-01) Ortiz J.O.; Betancur G.R.; Gómez J.; Castañeda L.F.; Zajsc G.; Gutiérrez-Carvajal R.E.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Estudios en Mantenimiento (GEMI)Many structural elements are exposed to load conditions that are difficult to model during the design phase, such as environmental uncertainties, random impacts, and overloading, amongst others, thus increasing unprogrammed maintenance and reducing confidence in the reliability of the structure in question. One way to deal with this problem is to monitor the structural condition of the element. This approach requires supervising several signals coming from critical locations and then performing an accurate condition estimation of the element in question based on the data collected. This study implements a method to diagnose and evaluate the reliability of the bolster beam structure of the railway vehicle during a fatigue test. The results show that multidimensional monitoring not only diagnoses the element accurately but also results in correct estimation of reliability. © 2017, © IMechE 2017.Ítem Full scale fatigue test performed to the bolster beam of a railway vehicle(Springer-Verlag France, 2018-02-01) Gutiérrez-Carvajal, R.E.; Betancur, G.R.; Barbosa, J.; Castañeda, L.F.; Zaja¸c, G.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Estudios en Mantenimiento (GEMI)Many structural elements are exposed to conditions of load that are difficult to consider during the design stage, such as environment uncertainties, random impacts, overloads and inherent material idealization amongst others, hence, miss-estimating its life-time cycle. One way to test those designs is to construct a representative full-scale specimen and test it under the most critical load conditions in a controlled laboratory. Herein, we present a case of study of the fatigue test performed over a bolster beam redesigned in Universidad EAFIT belonging to a railway vehicle. The test was composed by three stages, each one testing a different load hypothesis. The bolster beam was instrumented at the most critical locations, following the results of a FEM analysis previously computed. As results, the most critical welds were identified and the total damage computed for an equivalent operation of eighteen-years, and also the behaviour of the specimen in presence of extreme longitudinal loads. © 2016, Springer-Verlag France.Ítem Full scale fatigue test performed to the bolster beam of a railway vehicle(Springer-Verlag France, 2018-02-01) Gutiérrez-Carvajal, R.E.; Betancur, G.R.; Barbosa, J.; Castañeda, L.F.; Zaja¸c, G.; Gutiérrez-Carvajal, R.E.; Betancur, G.R.; Barbosa, J.; Castañeda, L.F.; Zaja¸c, G.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecatrónica y Diseño de MáquinasMany structural elements are exposed to conditions of load that are difficult to consider during the design stage, such as environment uncertainties, random impacts, overloads and inherent material idealization amongst others, hence, miss-estimating its life-time cycle. One way to test those designs is to construct a representative full-scale specimen and test it under the most critical load conditions in a controlled laboratory. Herein, we present a case of study of the fatigue test performed over a bolster beam redesigned in Universidad EAFIT belonging to a railway vehicle. The test was composed by three stages, each one testing a different load hypothesis. The bolster beam was instrumented at the most critical locations, following the results of a FEM analysis previously computed. As results, the most critical welds were identified and the total damage computed for an equivalent operation of eighteen-years, and also the behaviour of the specimen in presence of extreme longitudinal loads. © 2016, Springer-Verlag France.