Repositorio Institucional Universidad EAFIT ::Examinando por Materia "Degradation"

Examinando por Materia "Degradation"

Mostrando 1 - 9 de 9

The Box-Benkhen experimental design for the optimization of the electrocatalytic treatment of wastewaters with high concentrations of phenol and organic matter.
(IWA PUBLISHING, 2009-01-01) GilPavas, Edison; Betancourt, Alejandra; Angulo, Monica; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Betancourt, Alejandra; Angulo, Monica; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
In this work, the Box-Benkhen experimental Design (BBD) was applied for the optimization of the parameters of the electrocatalytic degradation of wastewaters resulting from a phenolic resins industry placed in the suburbs of Medellin (Colombia). The direct and the oxidant assisted electro-oxidation experiments were carried out in a laboratory scale batch cell reactor, with monopolar configuration, and electrodes made of graphite (anode) and titanium (cathode). A multifactorial experimental design was proposed, including the following experimental variables: initial phenol concentration, conductivity, and pH. The direct electro-oxidation process allowed to reach ca. 88% of phenol degradation, 38% of mineralization (TOC), 52% of Chemical Oxygen Demand (COD) degradation, and an increase in water biodegradability of 13%. The synergetic effect of the electro-oxidation process and the respective oxidant agent (Fenton reactant, potassium permanganate, or sodium persulfate) let to a significant increase in the rate of the degradation process. At the optimized variables values, it was possible to reach ca. 99% of phenol degradation, 80% of TOC and 88% of COD degradation. A kinetic study was accomplished, which included the identification of the intermediate compounds generated during the oxidation process.
Decolorization and mineralization of Diarylide Yellow 12 (PY12) by photo-Fenton process: the Response Surface Methodology as the optimization tool.
(IWA PUBLISHING, 2012-01-01) GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
The Response Surface Methodology (RSM) was applied as a tool for the optimization of the operational conditions of the photo-degradation of highly concentrated PY12 wastewater, resulting from a textile industry located in the suburbs of Medellin (Colombia). The Box-Behnken experimental Design (BBD) was chosen for the purpose of response optimization. The photo-Fenton process was carried out in a laboratory-scale batch photo-reactor. A multifactorial experimental design was proposed, including the following variables: the initial dyestuff concentration, the H(2)O(2) and the Fe(+2) concentrations, as well as the UV wavelength radiation. The photo-Fenton process performed at the optimized conditions resulted in ca. 100% of dyestuff decolorization, 92% of COD and 82% of TOC degradation. A kinetic study was accomplished, including the identification of some intermediate compounds generated during the oxidation process. The water biodegradability reached a final DBO(5)/DQO = 0.86 value.
Degradación de Colorante Amarillo 12 de Aguas Residuales Industriales utilizando Hierro Cero Valente, Peróxido de Hidrógeno y Radiación Ultravioleta
(Centro de Informacion Tecnologica, 2016-01-01) Gilpavas, E.; Medina, J.; Dobrosz-Gómez, I.; Gómez, M.Á.; Gilpavas, E.; Medina, J.; Dobrosz-Gómez, I.; Gómez, M.Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
The Fenton heterogeneous process in a fluidized bed reactor using Zero Valent Iron (ZVI), in the metallic state, for the treatment of textile wastewater has been used an analyzed. The aim of this work was to optimize the following operating parameters: initial dye concentration, H2O2 concentration, pH, amount of ZVI, and UV radiation, for the removal of dye and organic matter. At first, a fractional factorial experimental design allows defining the most influential factors. After that, they were optimized using the Response Surface Methodology coupled to the Box-Behnken experimental design. The optimal conditions were found to be as follows: initial dye concentration, 881 mg/L; pH 5; ZVI concentration, 5,31 g/L; H2O2 concentration, 0,86 mL/L. At these conditions, the degradation kinetics was performed, reaching 100% and 80,83% of dye and chemical oxygen demand respectively, in 150 minutes of reaction.
Efficient treatment for textile wastewater through sequential electrocoagulation, electrochemical oxidation and adsorption processes: Optimization and toxicity assessment
(Elsevier BV, 2020-01-01) GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
In this work, the sequential Electrocoagulation + Electro-oxidation + Activated carbon adsorption (EC + EO + AC) process was studied as an alternative for the treatment of an industrial textile wastewater (TWW) issuing from a manufacturing company located in Medellín (Colombia). The EC's and EO's operational conditions were optimized using a Box-Behnken experimental design, the Response Surface Methodology and a constrained nonlinear optimization algorithm in terms of organic matter degradation efficiency. The best performance for EC (i. e., dye removal = 94%, COD and TOC degradation of 45 and 40%, respectively) was obtained using Fe anode and Boron Doped Diamond (BDD) cathode, with current density, jEC, equals to 5 mA/cm2, pH = 9.3, 60 RPM and 10 min of electrolysis. After EC treatment, the effluent biodegradability (evaluated as the BOD5/COD ratio) increases from 0.14 to 0.23. Regrettably, EC was not effective for the removal of acute toxicity to Artemia salina since the treated effluent remained very toxic (100%). The treatment of EC's effluent by EO enhanced organic pollutant removal. For EC + EO sequential process, EO optimal operational conditions (jEO = 10 mA/cm2, pH = 3, 240 RPM, BDD as anode and Fe as cathode) allowed reduction of 100% of color, 88% of COD and 79% of TOC after 30 min of electrolysis. Moreover, the BOD5/COD ratio increased from 0.23 to 0.58; however, the treated effluent remained very toxic to the Artemia salina. Consequently, an activated carbon adsorption step was included to complete the treatment process. Thus, by coupling the EC + EO + AC process, effluent's acute toxicity decreased completely. From molecular weight distribution analysis, it was concluded that EC + EO was efficient in eliminating low molecular weight (< 5 kDa) compounds. Finally, the operation cost, which includes chemical reagents, electrodes, energy consumption, and sludge disposal, for the EC + EO + AC sequential process was estimated in 3.83 USD /m3. © 2020 Elsevier B.V.
Efficient treatment for textile wastewater through sequential electrocoagulation, electrochemical oxidation and adsorption processes: Optimization and toxicity assessment
(Elsevier BV, 2020-01-01) GilPavas E.; Dobrosz-Gómez I.; Gómez-García M.-Á.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
In this work, the sequential Electrocoagulation + Electro-oxidation + Activated carbon adsorption (EC + EO + AC) process was studied as an alternative for the treatment of an industrial textile wastewater (TWW) issuing from a manufacturing company located in Medellín (Colombia). The EC's and EO's operational conditions were optimized using a Box-Behnken experimental design, the Response Surface Methodology and a constrained nonlinear optimization algorithm in terms of organic matter degradation efficiency. The best performance for EC (i. e., dye removal = 94%, COD and TOC degradation of 45 and 40%, respectively) was obtained using Fe anode and Boron Doped Diamond (BDD) cathode, with current density, jEC, equals to 5 mA/cm2, pH = 9.3, 60 RPM and 10 min of electrolysis. After EC treatment, the effluent biodegradability (evaluated as the BOD5/COD ratio) increases from 0.14 to 0.23. Regrettably, EC was not effective for the removal of acute toxicity to Artemia salina since the treated effluent remained very toxic (100%). The treatment of EC's effluent by EO enhanced organic pollutant removal. For EC + EO sequential process, EO optimal operational conditions (jEO = 10 mA/cm2, pH = 3, 240 RPM, BDD as anode and Fe as cathode) allowed reduction of 100% of color, 88% of COD and 79% of TOC after 30 min of electrolysis. Moreover, the BOD5/COD ratio increased from 0.23 to 0.58; however, the treated effluent remained very toxic to the Artemia salina. Consequently, an activated carbon adsorption step was included to complete the treatment process. Thus, by coupling the EC + EO + AC process, effluent's acute toxicity decreased completely. From molecular weight distribution analysis, it was concluded that EC + EO was efficient in eliminating low molecular weight (< 5 kDa) compounds. Finally, the operation cost, which includes chemical reagents, electrodes, energy consumption, and sludge disposal, for the EC + EO + AC sequential process was estimated in 3.83 USD /m3. © 2020 Elsevier B.V.
Electrochemical Degradation of Acid Yellow 23 by Anodic OxidationOptimization of Operating Parameters
(American Society of Civil Engineers (ASCE), 2016-11-01) GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
In this study, the electrochemical oxidation (EO) process was implemented and optimized to effectively decolorize and degrade wastewater containing Acid Yellow 23 (Y23). The experiments were carried out in a laboratory-scale batch cell reactor, with monopolar configuration of electrodes, made of graphite (anode) and titanium (cathode). The response surface methodology (RSM), coupled with Box-Behnken experimental design (BBD), was used to evaluate the single and interactive effects of different variables of the EO process on (1)degradation percentages of both chemical oxygen demand (%DCOD) and color (%DC) and (2)energy consumption (EC). Thus, the following experimental factors were considered: initial dye concentration (40-100mg/L), current density (10-20mA/cm2), and conductivity (1,000-4,000S/cm). Thus, the subsequent conditions were found to be optimal for decolorization and degradation of Y23: initial dye concentration = 100mg/L; current density = 20mA/cm2; and conductivity = 4,000S/cm. At these conditions, the EO process allowed to reach approximately 99% of color degradation and 76% of COD degradation. Because NaCl was used as an electrolyte, chorine formation was monitored, and its effect on %DC and %DCOD was also evaluated.
Electrochemical Degradation of Acid Yellow 23 by Anodic OxidationOptimization of Operating Parameters
(American Society of Civil Engineers (ASCE), 2016-11-01) GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; GilPavas, Edison; Dobrosz-Gomez, Izabela; Angel Gomez-Garcia, Miguel; Universidad EAFIT. Departamento de Ingeniería de Procesos; Procesos Ambientales (GIPAB)
In this study, the electrochemical oxidation (EO) process was implemented and optimized to effectively decolorize and degrade wastewater containing Acid Yellow 23 (Y23). The experiments were carried out in a laboratory-scale batch cell reactor, with monopolar configuration of electrodes, made of graphite (anode) and titanium (cathode). The response surface methodology (RSM), coupled with Box-Behnken experimental design (BBD), was used to evaluate the single and interactive effects of different variables of the EO process on (1)degradation percentages of both chemical oxygen demand (%DCOD) and color (%DC) and (2)energy consumption (EC). Thus, the following experimental factors were considered: initial dye concentration (40-100mg/L), current density (10-20mA/cm2), and conductivity (1,000-4,000S/cm). Thus, the subsequent conditions were found to be optimal for decolorization and degradation of Y23: initial dye concentration = 100mg/L; current density = 20mA/cm2; and conductivity = 4,000S/cm. At these conditions, the EO process allowed to reach approximately 99% of color degradation and 76% of COD degradation. Because NaCl was used as an electrolyte, chorine formation was monitored, and its effect on %DC and %DCOD was also evaluated.
Reviewing microbial behaviors in ecosystems leading to a natural quorum quenching occurrence
(INST TECNOLOGIA PARANA, 2017-01-01) Sierra Zapata, Laura; Romero Tabarez, Magally; Correa Alvarez, Javier; Villegas Escobar, Valeska; Universidad EAFIT. Departamento de Ciencias; Biodiversidad, Evolución y Conservación
Quorum sensing is considered one of the most important discoveries in cell-to-cell communication. Although revealed in Bacteria, it has been identified as well as a mechanism present in the other two domains, Eukaryota and Archaea. This phenomenon consists mainly of an exchange and sensing of "words" produced by each cell: chemical signals known as autoinducers. The process takes places at high cell densities and confined environments, triggering the expression of specific genes that manifest in a determined phenotype. Quorum sensing has a fundamental importance in the organisms' fitness in natural ecosystems since it activates many of the traits needed by cells to survive under specific conditions, and thus a wide variety of chemical signals, which are detailed throughout the review, have evolved in response to the needs of an organism in the ecosystem it inhabits. As a counterpart, derived from the natural occurrence of quorum sensing, comes it's antagonistic process named quorum quenching. Acting in the exact opposite way, quorum quenching interferes or degrades the autoinducers confusing and stopping communication, hence affecting transcriptional regulation and expression of a specific phenotype. The main reasons for stopping this mechanism go from fading their own signals when perceiving scarce nutrients conditions, to degrading competitors' signals to take advantage in the ecosystem. Some of the most studied purposes and means known up to date to be used by cells for making quorum quenching in their ecosystems is what will be discussed along this review, offering information for future works on quorum quencher molecules bioprospection.
Reviewing microbial behaviors in ecosystems leading to a natural quorum quenching occurrence
(INST TECNOLOGIA PARANA, 2017-01-01) Sierra Zapata, Laura; Romero Tabarez, Magally; Correa Alvarez, Javier; Villegas Escobar, Valeska; Universidad EAFIT. Departamento de Ciencias; Ciencias Biológicas y Bioprocesos (CIBIOP)
Quorum sensing is considered one of the most important discoveries in cell-to-cell communication. Although revealed in Bacteria, it has been identified as well as a mechanism present in the other two domains, Eukaryota and Archaea. This phenomenon consists mainly of an exchange and sensing of "words" produced by each cell: chemical signals known as autoinducers. The process takes places at high cell densities and confined environments, triggering the expression of specific genes that manifest in a determined phenotype. Quorum sensing has a fundamental importance in the organisms' fitness in natural ecosystems since it activates many of the traits needed by cells to survive under specific conditions, and thus a wide variety of chemical signals, which are detailed throughout the review, have evolved in response to the needs of an organism in the ecosystem it inhabits. As a counterpart, derived from the natural occurrence of quorum sensing, comes it's antagonistic process named quorum quenching. Acting in the exact opposite way, quorum quenching interferes or degrades the autoinducers confusing and stopping communication, hence affecting transcriptional regulation and expression of a specific phenotype. The main reasons for stopping this mechanism go from fading their own signals when perceiving scarce nutrients conditions, to degrading competitors' signals to take advantage in the ecosystem. Some of the most studied purposes and means known up to date to be used by cells for making quorum quenching in their ecosystems is what will be discussed along this review, offering information for future works on quorum quencher molecules bioprospection.

Examinando por Materia "Degradation"

Resultados por página

Opciones de ordenación