Examinando por Materia "3D modeling"

Mostrando 1 - 3 de 3
  • No hay miniatura disponible
    Ítem
    Albatros Create: an interactive and generative tool for the design and 3D modeling of wind turbines with wavy leading edge
    (Springer-Verlag France, 2020-01-01) Arias-Rosales A.; Osorio-Gómez G.; Universidad EAFIT. Departamento de Ingeniería de Diseño; Ingeniería de Diseño (GRID)
    The shape of a wind turbine blade plays a critical role in the efficiency and robustness of energy production. In particular, the Wavy Leading Edge is a morphology that can be implemented in the blades to improve the operating range in unsteady conditions. The best performance is achieved by fine-tuning the blade geometry to the specific context. An aerodynamic exploration of these kinds of morphologies implies generating and evaluating design iterations. Accordingly, this work presents the development of the generative tool Albatros Create ®. Through interactive visualization, infographics, and centralized parameterization, its goal is to support the geometrical definition of the aerodynamic surfaces of horizontal-axis turbines with or without a wavy leading edge. New airfoil profiles can be created, and 3D models of the rotors designed can be automatically generated. The software was implemented in the design of two rotors which were then recreated in a benchmarking analysis with four other softwares. None of the four managed to generate the smooth surfaces in fully-editable models that were achieved with Albatros Create. This work aims at empowering the research community with a user-friendly tool for exploring rotor designs through virtual prototypes. This can help to integrate further the design, modeling, and optimization stages, addressing a wider audience and facilitating the implementation of Wavy Leading Edge morphologies. © 2020, Springer-Verlag France SAS, part of Springer Nature.
  • No hay miniatura disponible
    Ítem
    Estuarine Light Attenuation Modelling Towards Improved Management of Coastal Fisheries
    (SPRINGER, 2019-01-01) Tosic M.; Martins F.; Lonin S.; Izquierdo A.; Restrepo J.D.; Universidad EAFIT. Departamento de Ingeniería; Ciencias del Mar
    The ecosystem function of local fisheries holds great societal importance in the coastal zone of Cartagena, Colombia, where coastal communities depend on artisanal fishing for their livelihood and health. These fishing resources have declined sharply in recent decades partly due to issues of coastal water pollution. Mitigation strategies to reduce pollution can be better evaluated with the support of numerical hydrodynamic models. To model the hydrodynamics and water quality in Cartagena Bay, significant consideration must be dedicated to the process of light attenuation, given its importance to the bay’s characteristics of strong vertical stratification, turbid surface water plumes, algal blooms and hypoxia. This study uses measurements of total suspended solids (TSS), turbidity, chlorophyll-a (Chla) and Secchi depth monitored in the bay monthly over a 2-year period to calculate and compare the short-wave light extinction coefficient (Kd) according to nine different equations. The MOHID-Water model was used to simulate the bay’s hydrodynamics and to compare the effect of three different Kd values on the model’s ability to reproduce temperature profiles observed in the field. Simulations using Kd values calculated by equations that included TSS as a variable produced better results than those of an equation that included Chla as a variable. Further research will focus on evaluating other Kd calculation methods and comparing these results with simulations of different seasons. This study contributes valuable knowledge for eutrophication modelling which would be beneficial to coastal zone management in Cartagena Bay. © 2019, Springer Nature Switzerland AG.
  • No hay miniatura disponible
    Ítem
    Modelling 3D metal cutting problems with the particle finite element method
    (Springer Verlag, 2020-01-01) Carbonell, J.M.; Rodríguez, J.M.; Oñate, E.; Carbonell, J.M.; Rodríguez, J.M.; Oñate, E.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecatrónica y Diseño de Máquinas
    This work presents the development of the Particle Finite Element Method (PFEM) for the modelling of 3D solid mechanics problems under cutting conditions. The study and analysis of numerical models reproducing the cut of a material is a matter of interest in several areas; namely, the improvement of the material properties, the optimization of the process and tool geometries and the prediction of unexpected failures. The analysis of bi-dimensional (2D) models is the most common approach for different reasons. Just focusing on the simulation point of view, it is the simplest procedure, the cheapest in terms of computational cost and sometimes the only feasible numerical solution. However, many industrial machining processes, such as cutting, blanking, milling and drilling have not a possible simplification to 2D models. Actually even a simple turning processes for non-orthogonal cuts can not be simplified to 2D. This work present an upgrade of the PFEM techniques in order to deal with the 3D machining problems. We present recent improvements in the finite element formulation, the meshing re-connections and the contact detection. By applying these developments the PFEM has the capability for modelling a wide range of practical machining processes. In this paper the capacity of the formulation and the accuracy of the results are analyzed and validated with some representative examples. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.