Examinando por Autor "Garcia C.A.R."

Mostrando 1 - 7 de 7
  • No hay miniatura disponible
    Ítem
    Correlation between procedural and conceptual test in a statics course
    (Institute of Electrical and Electronics Engineers Inc., 2019-01-01) Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Estudios en Mantenimiento (GEMI)
    Due to poor performance in Statics at Eafit University, since 2012 the Mechanical Engineering department implemented a virtual tool for the training and assessment of Statics course. Although the implementation led to better performance in the Statics course, students were still showing lack of comprehension of the basic concepts underlying the subject. The department applied a Concept Inventory test to 195 students from the second semester of 2017 in order to check if there was a correlation between the grades obtained in the class examinations and the performance in a conceptual test of Statics. The Concept Inventory was applied one week before the final examination and it was held inside the University facilities. The students were monitored all the time. For the course examinations were taken only three out of the four partial exams, they were computed and then compared to the results of the concept inventory. The results show that almost all the students with the highest grades in the class performed above the mean in the Concept Inventory. The overall mean for the conceptual test was 9.27 and the standard deviation was 5.28. The course grades were discriminated by career and an Analysis of Variance was conducted to determine if there were significant differences among the groups. A correlation analysis suggests that there is not a strong correlation between the course grades and the concept inventory results. One possible explanation for this can be due to the fact that the regular teaching method for these kind of basic courses in engineering in the University is merely procedural and problem-solving oriented, conceptual approaches are often neglected in both teaching and assessment. © 2018 IEEE.
  • No hay miniatura disponible
    Ítem
    Correlation between procedural and conceptual test in a statics course
    (Institute of Electrical and Electronics Engineers Inc., 2019-01-01) Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecatrónica y Diseño de Máquinas
    Due to poor performance in Statics at Eafit University, since 2012 the Mechanical Engineering department implemented a virtual tool for the training and assessment of Statics course. Although the implementation led to better performance in the Statics course, students were still showing lack of comprehension of the basic concepts underlying the subject. The department applied a Concept Inventory test to 195 students from the second semester of 2017 in order to check if there was a correlation between the grades obtained in the class examinations and the performance in a conceptual test of Statics. The Concept Inventory was applied one week before the final examination and it was held inside the University facilities. The students were monitored all the time. For the course examinations were taken only three out of the four partial exams, they were computed and then compared to the results of the concept inventory. The results show that almost all the students with the highest grades in the class performed above the mean in the Concept Inventory. The overall mean for the conceptual test was 9.27 and the standard deviation was 5.28. The course grades were discriminated by career and an Analysis of Variance was conducted to determine if there were significant differences among the groups. A correlation analysis suggests that there is not a strong correlation between the course grades and the concept inventory results. One possible explanation for this can be due to the fact that the regular teaching method for these kind of basic courses in engineering in the University is merely procedural and problem-solving oriented, conceptual approaches are often neglected in both teaching and assessment. © 2018 IEEE.
  • No hay miniatura disponible
    Ítem
    Efecto de un sistema de evaluación de ambiente virtual sobre el rendimiento académico en un curso de Estática en ingeniería
    (Latin American and Caribbean Consortium of Engineering Institutions, 2018-01-01) Pérez J.L.B.; Ochoa J.L.R.; Cadavid A.R.; Calderon J.P.R.; Garcia C.A.R.; Universidad EAFIT. Departamento de Administración; Estudios Internacionales
    The engineering department of EAFIT University have developed and implemented an evaluation and training virtual system directed to the engineering students that take the Statics course. The system allows the students of several engineering programs to execute different exercises about specific topics included in the syllabus. The system also allows assessing the students' knowledge through weekly quizzes. With the implementation of the evaluation system, the engineering department aimed at improving the academic performance and the learning process of the students. This paper presents the results of a structural equation modeling analysis. The variables included in the analysis were; time of use of the system, results in quizzes and midterm exams grades assigned by the lecturers. The purpose of the analyses was to test the effect of time of use of the system and grades in the quizzes on academic performance represented by midterm grades (paper-based format). The analysis was performed with the data obtained from both, the virtual system and the course grades during year 2014. The findings suggest that both the time of use of the virtual system and good results in the quizzes have a positive influence on the midterm exams results. Therefore, it is concluded that the use of the virtual evaluation system has a positive effect on the students' academic performance. © 2018 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.
  • No hay miniatura disponible
    Ítem
    Efecto de un sistema de evaluación de ambiente virtual sobre el rendimiento académico en un curso de Estática en ingeniería
    (Latin American and Caribbean Consortium of Engineering Institutions, 2018-01-01) Pérez J.L.B.; Ochoa J.L.R.; Cadavid A.R.; Calderon J.P.R.; Garcia C.A.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Estudios en Mantenimiento (GEMI)
    The engineering department of EAFIT University have developed and implemented an evaluation and training virtual system directed to the engineering students that take the Statics course. The system allows the students of several engineering programs to execute different exercises about specific topics included in the syllabus. The system also allows assessing the students' knowledge through weekly quizzes. With the implementation of the evaluation system, the engineering department aimed at improving the academic performance and the learning process of the students. This paper presents the results of a structural equation modeling analysis. The variables included in the analysis were; time of use of the system, results in quizzes and midterm exams grades assigned by the lecturers. The purpose of the analyses was to test the effect of time of use of the system and grades in the quizzes on academic performance represented by midterm grades (paper-based format). The analysis was performed with the data obtained from both, the virtual system and the course grades during year 2014. The findings suggest that both the time of use of the virtual system and good results in the quizzes have a positive influence on the midterm exams results. Therefore, it is concluded that the use of the virtual evaluation system has a positive effect on the students' academic performance. © 2018 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.
  • No hay miniatura disponible
    Ítem
    Efecto de un sistema de evaluación de ambiente virtual sobre el rendimiento académico en un curso de Estática en ingeniería
    (Latin American and Caribbean Consortium of Engineering Institutions, 2018-01-01) Pérez J.L.B.; Ochoa J.L.R.; Cadavid A.R.; Calderon J.P.R.; Garcia C.A.R.; Pérez J.L.B.; Ochoa J.L.R.; Cadavid A.R.; Calderon J.P.R.; Garcia C.A.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecatrónica y Diseño de Máquinas
    The engineering department of EAFIT University have developed and implemented an evaluation and training virtual system directed to the engineering students that take the Statics course. The system allows the students of several engineering programs to execute different exercises about specific topics included in the syllabus. The system also allows assessing the students' knowledge through weekly quizzes. With the implementation of the evaluation system, the engineering department aimed at improving the academic performance and the learning process of the students. This paper presents the results of a structural equation modeling analysis. The variables included in the analysis were; time of use of the system, results in quizzes and midterm exams grades assigned by the lecturers. The purpose of the analyses was to test the effect of time of use of the system and grades in the quizzes on academic performance represented by midterm grades (paper-based format). The analysis was performed with the data obtained from both, the virtual system and the course grades during year 2014. The findings suggest that both the time of use of the virtual system and good results in the quizzes have a positive influence on the midterm exams results. Therefore, it is concluded that the use of the virtual evaluation system has a positive effect on the students' academic performance. © 2018 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.
  • No hay miniatura disponible
    Ítem
    Reliability of a concept inventory to determine the level of students in statics
    (Institute of Electrical and Electronics Engineers Inc., 2019-01-01) Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Estudios en Mantenimiento (GEMI)
    Basic core courses in engineering are often taught and assessed only through procedural approaches, neglecting the conceptual grounds of the subject. In an effort to change that, a Concept Inventory test was applied to 195 students at Eafit University enrolled in Statics. All of the students took the test inside in the campus facilities and were monitored during the whole session to make sure they did not share information. The students took a Computer-Based Test of the Concept Inventory. Three new items were added to the original test of 27 questions, in order to improve the reliability of two specific groups of concepts. For the test was found a mean of 9.7 and a standard deviation of 5.28. For the overall test, the Cronbach's alpha coefficient was 0.81. The psychometric analyses show that all of the items in the test, except one, present an appropriate fit for discrimination and difficulty parameters of the test. Item 26 was deleted when performing the analysis of sub-scales reliability because presented abnormal value for difficulty. For the cluster of Equilibrium, it was seen that deleting this item resulted in an increase of the alpha from 0.2 to 0.36. For the sub-scale of Free-Body Diagram was seen a decrease in the reliability when two new items were added to it. All of the other sub-scales presented good reliability, most of them, above 0.5. The item-person map shows that the overall latent trait of students is lower than the overall test difficulty, meaning that most of the students found the test difficult. One of the conclusion to be drawn from the results is that the students subjected mainly to procedural approaches in teaching, do not perform well in conceptual tests. The results support the claim that Statics can be seen as a collection of concepts that can be clustered in independent groups for teaching. © 2018 IEEE.
  • No hay miniatura disponible
    Ítem
    Reliability of a concept inventory to determine the level of students in statics
    (Institute of Electrical and Electronics Engineers Inc., 2019-01-01) Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Garcia C.A.R.; Perez J.L.B.; Ochoa J.L.R.; Universidad EAFIT. Departamento de Ingeniería Mecánica; Mecatrónica y Diseño de Máquinas
    Basic core courses in engineering are often taught and assessed only through procedural approaches, neglecting the conceptual grounds of the subject. In an effort to change that, a Concept Inventory test was applied to 195 students at Eafit University enrolled in Statics. All of the students took the test inside in the campus facilities and were monitored during the whole session to make sure they did not share information. The students took a Computer-Based Test of the Concept Inventory. Three new items were added to the original test of 27 questions, in order to improve the reliability of two specific groups of concepts. For the test was found a mean of 9.7 and a standard deviation of 5.28. For the overall test, the Cronbach's alpha coefficient was 0.81. The psychometric analyses show that all of the items in the test, except one, present an appropriate fit for discrimination and difficulty parameters of the test. Item 26 was deleted when performing the analysis of sub-scales reliability because presented abnormal value for difficulty. For the cluster of Equilibrium, it was seen that deleting this item resulted in an increase of the alpha from 0.2 to 0.36. For the sub-scale of Free-Body Diagram was seen a decrease in the reliability when two new items were added to it. All of the other sub-scales presented good reliability, most of them, above 0.5. The item-person map shows that the overall latent trait of students is lower than the overall test difficulty, meaning that most of the students found the test difficult. One of the conclusion to be drawn from the results is that the students subjected mainly to procedural approaches in teaching, do not perform well in conceptual tests. The results support the claim that Statics can be seen as a collection of concepts that can be clustered in independent groups for teaching. © 2018 IEEE.