Desarrollo y Diseño de Procesos

URI permanente para esta comunidad

https://hdl.handle.net/10784/28123

El grupo de desarrollo y diseño de procesos busca desarrollar y mejorar procesos empleando herramientas teóricas y experimentales para satisfacer las necesidades industriales y ambientales del país y la región.

Líneas de investigación: Desarrollo de Procesos y Productos; Simulación y Modelación; Procesos Ambientales.
Código Minciencias: COL0037569.
Categoría 2019: A1.
Escuela: Ingeniería.
Departamento académico: Ingeniería de Procesos.
Coordinadora: Santiago Builes Toro.
Correo electrónico: sbuiles@eafit.edu.co

Examinar

Mostrando 1 - 9 de 9

Collaborative Networked Virtual Surgical Simulators (CNVSS) Implementing Hybrid Client-Server Architecture: Factors Affecting Collaborative Performance
(MIT PRESS, 2015-01-01) Diaz, Christian; Trefftz, Helmuth; Quintero, Lucia; Acosta, Diego A.; Srivastava, Sakti; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
Currently, surgical skills teaching in medical schools and hospitals is changing, requiring the development of new tools to focus on (i) the importance of the mentor's role, (ii) teamwork skills training, and (iii) remote training support. Collaborative Networked Virtual Surgical Simulators (CNVSS) allow collaborative training of surgical procedures where remotely located users with different surgical roles can take part in the training session. To provide successful training involving good collaborative performance, CNVSS should guarantee synchronicity in time of the surgical scene viewed by each user and a quick response time which are affected by factors such as users' machine capabilities and network conditions. To the best of our knowledge, the impact of these factors on the performance of CNVSS implementing hybrid client-server architecture has not been evaluated. In this paper the development of a CNVSS implementing a hybrid client-server architecture and two statistical designs of experiments (DOE) is described by using (i) a fractional factorial DOE and (ii) a central composite DOE, to determine the most influential factors and how these factors affect the collaboration in a CNVSS. From the results obtained, it was concluded that packet loss, bandwidth, and delay have a larger effect on the consistency of the shared virtual environment, whereas bandwidth, server machine capabilities, and delay and interaction between factors bandwidth and packet loss have a larger effect on the time difference and number of errors of the collaborative task.
Collaborative Networked Virtual Surgical Simulators (CNVSS): Factors Affecting Collaborative Performance
(MIT PRESS, 2013-01-01) Diaz, Christian; Trefftz, Helmuth; Quintero, Lucia; Acosta, Diego A.; Srivastava, Sakti; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
Stand-alone and networked surgical simulators based on virtual reality have been proposed as a means to train surgeons in specific surgical skills with or without expert guidance and supervision. However, a surgical operation usually involves a group of medical practitioners who cooperate as team members. To this end, CNVSS have been proposed for the collaborative training of surgical procedures in which users with different surgical roles can take part in the training session. To be successful, these simulators should guarantee synchronicity, which requires (1) consistent viewing of the surgical scene and (2) a quick response time. These two variables are affected by factors such as users' machine capabilities and network conditions. As far as we know, the impact of these factors on the performance of CNVSS has not been evaluated. In this paper, we describe the development of CNVSS and a statistical factorial design of experiments (DOE) to determine the most important factors affecting collaboration in CNVSS. From the results obtained, it was concluded that delay, jitter, packet loss percentage, and processor speed have a major impact on collaboration in CNVSS.
Design of computer experiments applied to modeling of compliant mechanisms for real-time control
(SPRINGER, 2013-07-01) Acosta, Diego A.; Restrepo, David; Durango, Sebastian; Ruiz, Oscar E.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
This article discusses the use of design of computer experiments (DOCE) (i.e., experiments run with a computer model to find how a set of inputs affects a set of outputs) to obtain a force-displacement meta-model (i.e., a mathematical equation that summarizes and aids in analyzing the input-output data of a DOCE) of compliant mechanisms (CMs). The procedure discussed produces a force-displacement meta-model, or closed analytic vector function, that aims to control CMs in real-time. In our work, the factorial and space-filling DOCE meta-model of CMs is supported by finite element analysis (FEA). The protocol discussed is used to model the HexFlex mechanism functioning under quasi-static conditions. The HexFlex is a parallel CM for nano-manipulation that allows six degrees of freedom (x, y, z, ? x, ? y, ? z ) of its moving platform. In the multi-linear model fit of the HexFlex, the products or interactions proved to be negligible, yielding a linear model (i.e., linear in the inputs) for the operating range. The accuracy of the meta-model was calculated by conducting a set of computer experiments with random uniform distribution of the input forces. Three error criteria were recorded comparing the meta-model prediction with respect to the results of the FEA experiments by determining: (1) maximum of the absolute value of the error, (2) relative error, and (3) root mean square error. The maximum errors of our model are lower than high-precision manufacturing tolerances and are also lower than those reported by other researchers who have tried to fit meta-models to the HexFlex mechanism. © 2012 Springer-Verlag London Limited.
Diseño conceptual de una sonda langmüir para caracterización de plasmas fríos mediante diseño estadístico de experimentos.
(IMPRENTA UNIV ANTIOQUIA, 2013-01-01) Camargo, V.; Acosta, Diego A.; JARAMILLO, JUAN MANUEL; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
The characterization and control of plasma-assisted processes, has become increasingly urgent to adapt this kind technology to industrial contexts. This work presents the design and construction of a cold plasma characterization system by electrostatic means (Langmuir probe), based on concepts of plasma physics and tools of engineering, design of experiments and conceptual design. The result of this work is a functional prototype probe and some measurements on the reactor.
Fitting of Analytic Surfaces to Noisy Point Clouds
(2013-01-01) RUIZ, OSCAR EDUARDO; Arroyave-Tobón, S.; Acosta, Diego A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
Fitting -continuous or superior surfaces to a set of points sampled on a 2-manifold is central to reverse engineering, computer aided geometric modeling, entertaining, modeling of art heritage, etc. This article addresses the fitting of analytic (ellipso
Geodesic-based manifold learning for parameterization of triangular meshes
(Springer-Verlag France, 2016-11-01) Acosta, D.A.; Ruiz, O.E.; Arroyave, S.; Ebratt, R.; Cadavid, C.; Londono, J.J.; Acosta, Diego A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
Reverse Engineering (RE) requires representing with free forms (NURBS, Spline, B,zier) a real surface which has been point-sampled. To serve this purpose, we have implemented an algorithm that minimizes the accumulated distance between the free form and the (noisy) point sample. We use a dual-distance calculation point to / from surfaces, which discourages the forming of outliers and artifacts. This algorithm seeks a minimum in a function that represents the fitting error, by using as tuning variable the control polyhedron for the free form. The topology (rows, columns) and geometry of the control polyhedron are determined by alternative geodesic-based dimensionality reduction methods: (a) graph-approximated geodesics (Isomap), or (b) PL orthogonal geodesic grids. We assume the existence of a triangular mesh of the point sample (a reasonable expectation in current RE). A bijective composition mapping allows to estimate a size of the control polyhedrons favorable to uniform-speed parameterizations. Our results show that orthogonal geodesic grids is a direct and intuitive parameterization method, which requires more exploration for irregular triangle meshes. Isomap gives a usable initial parameterization whenever the graph approximation of geodesics on be faithful. These initial guesses, in turn, produce efficient free form optimization processes with minimal errors. Future work is required in further exploiting the usual triangular mesh underlying the point sample for (a) enhancing the segmentation of the point set into faces, and (b) using a more accurate approximation of the geodesic distances within , which would benefit its dimensionality reduction.
III Congreso Internacional sobre Diseño de Procesos y Productos
(Fondo Editorial Universidad EAFIT, 2011-10-14) Acosta, Diego A.; Gil Pavas, Edison; MOLINA, KEVIN GIOVANNI; ESCOBAR, JAIME ALBERTO
Sensitivity analysis in optimized parametric curve fitting
(EMERALD GROUP PUBLISHING LIMITED, 2015-03-02) Ruiz, Oscar E.; Cortes, Camilo; Acosta, Diego A.; Aristizabal, Mauricio; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
Purpose-Curve fitting from unordered noisy point samples is needed for surface reconstruction in many applications. In the literature, several approaches have been proposed to solve this problem. However, previous works lack formal characterization of the curve fitting problem and assessment on the effect of several parameters (i.e. scalars that remain constant in the optimization problem), such as control points number (m), curve degree (b), knot vector composition (U), norm degree (k ), and point sample size (r) on the optimized curve reconstruction measured by a penalty function ( f ). The paper aims to discuss these issues. Design/methodology/approach-A numerical sensitivity analysis of the effect of m, b, k and r on f and a characterization of the fitting procedure from the mathematical viewpoint are performed. Also, the spectral (frequency) analysis of the derivative of the angle of the fitted curve with respect to u as a means to detect spurious curls and peaks is explored. Findings-It is more effective to find optimum values for m than k or b in order to obtain good results because the topological faithfulness of the resulting curve strongly depends on m. Furthermore, when an exaggerate number of control points is used the resulting curve presents spurious curls and peaks. The authors were able to detect the presence of such spurious features with spectral analysis. Also, the authors found that the method for curve fitting is robust to significant decimation of the point sample. Research limitations/implications-The authors have addressed important voids of previous works in this field. The authors determined, among the curve fitting parameters m, b and k, which of them influenced the most the results and how. Also, the authors performed a characterization of the curve fitting problem from the optimization perspective. And finally, the authors devised a method to detect spurious features in the fitting curve. Practical implications-This paper provides a methodology to select the important tuning parameters in a formal manner. Originality/value-Up to the best of the knowledge, no previous work has been conducted in the formal mathematical evaluation of the sensitivity of the goodness of the curve fit with respect to different possible tuning parameters (curve degree, number of control points, norm degree, etc.). © Emerald Group Publishing Limited.
Using scrap zero valent iron to replace dissolved iron in the Fenton process for textile wastewater treatment: Optimization and assessment of toxicity and biodegradability
(Elsevier Ltd., 2019-09-01) GilPavas, Edison; Correa-Sanchez, Santiago; Acosta, Diego A.; Universidad EAFIT. Departamento de Ingeniería de Procesos; Desarrollo y Diseño de Procesos
A Fenton like advanced oxidation process (AOP) employing scrap zerovalent iron (SZVI) and hydrogen peroxide (H2O2) was studied for industrial textile wastewater treatment from a textile manufacturing plant located at Medellin, Colombia (South America). The wastewater effluent studied contains a mixture of organic compounds resistant to conventional treatments. The effect of initial pH and SZVI concentration and H2O2 concentration were studied by a response surface methodology (RSM) Box-Behnken design of experiment (BBD). The combined SZVI/H2O2 process led to reductions of 95% color, 76% of chemical oxygen demand (COD) and 71% of total organic carbon (TOC) at optimal operating conditions of pH = 3, SZVI = 2000 mg/L and [H2O2] = 24.5 mM. Molecular weight distribution measurement (MWD), ultraviolet-visible (UV-Vis) spectroscopy, HPLC, biodegradability and toxicity were used to characterize the pollutants after the treatment process finding that the resulting effluent was polluted mostly by low molecular weight carboxylic acids. A remarkable biodegradability enhancement of the effluent was evidenced by a BOD5/COD ratio increase from 0.22 to 0.4; also, the SZVI/H2O2 process successfully reduced the toxicity from 60% to 20% of dead A. Salina crustaceans. (C) 2019 Elsevier Ltd. All rights reserved.

Examinar

Examinando Desarrollo y Diseño de Procesos por Autor "Acosta, Diego A."

Resultados por página

Opciones de ordenación